Average Reviews:
(More customer reviews)The MK-370K is an excellent value and has been the perfect workhorse for smaller tile jobs of around 300 square feet. The stand included is an added bonus that really adds convenience.
This saw is very loud in addition to having all the normal puddle producing water splash of bigger saws. Because of this, you really can't operate in finished indoor areas or without the recommended hearing protection.
I've used this saw for several months almost exclusively to cut 1/2"X 12" porcelain floor tiles with excellent results. The maximum depth of cut is rated at 1-3/4 inches.
The 7-inch MK Premium Series blade that comes with the saw is a good blade for cutting ceramic tile, but is not intended for continuous cutting of porcelain tile, even though it did a good job with it for quite a while before replacement was necessary. You'll need to upgrade to the better MK Supreme Series or similar blade for this type of work.
The saw has a sturdy plastic water tray that is easy to clean with the aid of a flexible mixing spatula. It doesn't come with a drain plug but you can get the small rubber push-in type from MK or a local Plumbing Supply and install it yourself.
The water pump is a good quality unit made by Little Giant and has an adjustable output. It is easy to disassemble for cleaning and plugs into a receptacle on top of the motor that is controlled by the motor switch. It runs only when you're actually using the machine. I avoid the natural tendency to place the pump filter side down in the tray and instead place it filter side up to keep out tiny tile chips or slurry sediment then occasionally add water to the tray as needed during use to keep the pump intake submerged. Even with the heaviest saw use, it goes all day long without a clog or any reduction of water output.
I have also begun putting a thin coating of Sil-Glyde silicone grease on the table slide rod and rollers once a day to help keep tile grit from binding them during use. This holds up to water splash better and lasts much longer than oil or spray lubes.
Overall, I have been very pleased with this saw. Considering its capabilities and modest cost, I have no problem recommending it to anyone.
Click Here to see more reviews about: MK-370EXP 1-1/4 HP 7-Inch Wet Cutting Tile Saw
Providing professional quality at an affordable price, the MK Diamond MK-370EXP 1-1/4-Horsepower 7-Inch Wet-Cutting Tile Saw with Stand has a lightweight yet powerful design ideal for both professionals and weekend warriors. Designed for wet cutting of tile and marble, this saw comes with submersible water pump, adjustable rip guide, and convenient folding stand.
MK-370EXP Wet-CuttingTile Saw with StandAt a Glance:
Get 28% OFF
Click here for more information about MK-370EXP 1-1/4 HP 7-Inch Wet Cutting Tile Saw
0 comments:
Post a Comment