Average Reviews:
(More customer reviews)The machine is absolutely heavy duty. Although, there are a few things that I have found issue with:
1) machine doesn't work well with wide poplar boards. I have a heavy duty dust collection system connected to it but the poplar creates long strands from the wide boards. These strands clog up the exhaust chute causing the shavings to back up onto the outfeed roller and stop the boards from continuing through the planer part way through a feed. Basically have to lower the table and pull the board out to clean the strands out. This binding of the strands has tore up the outfeed urethance rollers to the point of no return. ***update: I was able to take the rollers off the machine and turn the urethane down on an engine lathe to straighten the urethane after much use. (note: high rpm, low feed rate and a touch with sand paper when finished) Works better than new now. I should be able to do this a few times before having to buy new ones. By the way, the new rollers are pretty cheap to replace.***
2) Wish the table length was longer or adaptable to adding an extension. Would be nice.
The machine is very easy to work with and work on. The molding feature is great and works well. I've done all the trim in my new house with this machine. Hope to have a long future with it in my business.
Click Here to see more reviews about: Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-Phase
The Powermatic PM15 Planer/Molder is a true workhorse that handles a wide array of jobs quickly, easily, and with precision. Using single or three-piece molding knives, this tool gives you wide selection of profiles. The perfect choice for the professional woodworker or serious hobbyist, the PM15 also features two feed speeds, adjustable depth of cut, and a hinged top with four-inch dust port.
Gets the Job Done Quickly and EasilyEquipped with a five-horsepower motor that spins the cutterhead at 4,500 RPM, the PM15 can power through the hardest materials with ease.
Great for heavy-duty projects, this machine also has a 15-inch planing capacity--enough to run double molding knife sets--and a cutting speed of 13,500 cuts per minute.
Adjustable Features for Versatility and PrecisionTo give you maximum versatility and precision, the PM15 offers two feed speeds: 10 and 20 FPM. The lower speed is perfect for projects that require maximum stock removal, the higher speed is ideal for achieving fine milled finishes on decorative moldings.
What's more, the PM15's table height can be adjusted with a chain and sprocket for precise depths of cut. An easy-to-read depth-of-cut scale has a large hand wheel for quick setups, and the hinged top ensures effortless tooling changes.
Durably Designed with a Convenient Dust PortThe PM15's table is made of cast iron with polished, precision-ground surfaces for durability and easy feeds. Four lead screws support the table, and a full cast-iron head assembly supports the feed rollers and cutter head.
For convenience, an integrated dust port hooks up to your dust collection system for improved visibility and a healthier, more pleasant work environment.
Dimensions and Warranty InformationThe PM15 measures approximately 34.0 x 51.0 x 28.0 inches (WxHxD), weighs 423 pounds, and is backed by a five-year warranty.
What's in the BoxPlaner/Molder; one handwheel; one knife-setting gauge; one dust chute with fasteners; one manual; and one warranty card.
Get 22% OFF
0 comments:
Post a Comment