Baracuda G3 Automatic Cleaner Review

Average Reviews:

(More customer reviews)I have owned a Hayward Navigator ( did a good job but it was always getting stuff clogged in it and it costs about $100-125 per year in parts to keep it alive. ) Then I went with the Plaris ATV and it lasted 2 years and died. I went to lots of pool places around town who don't sell it because it broke down a lot. It would have cost me close to $200 to fix, or $300 or so for a new pool cleaner. I live in AZ and we get large dust storms that line the bottom of the pool with dirt and leaves. I stuck the Baracuda in and withen one and a half ours my pool looked like new. The thing only travels up the sides about 3-4 feet, no biggie. It stays off the steps too which is fine with me.
The guy at the pool store said this is the longest lasting and cheapist to fix when and if it needs it.


Click Here to see more reviews about: Baracuda G3 Automatic Cleaner

The Baracuda G3TM from Zodiac does all the pool cleaning for you. Baracuda G3TM IS TIME-TESTED. This top-of-the-line BARACUDA G3TM cleaner will thoroughly clean your inground pool floor and walls to automatically remove dirt, debris, bugs, twigs, leaves, sand and even pebbles. Its bumper fin and anti-stick design ensure maximum coverage and increased maneuverability. Baracuda G3TM IS EASY TO INSTALL. You can install the BARACUDA G3TM in minutes. Since it's pre-assembled in the box, just attach the disc and Long-Life hoses. No tools are required. We even include an easy-to-follow video to show you what to do. The BARACUDA G3TM also has the FLOWKEEPER®, a self-adjusting water control valve and surface skimmer all in one, which automatically regulates water flow ensuring peak performance. Baracuda G3TM IS POOL OWNER FRIENDLY. The BARACUDA G3TM is one of the most pool-owner-friendly cleaners ever made. It has only one operational moving part, the Long-Life diaphragm. If it should ever need service, its patented Quick Release Cassette lets you remove it, service it yourself or replace it poolside. Baracuda G3TM IS QUIETER. Other automatic pool cleaners have a flapper, which makes an annoying hammer noise. The BARACUDA G3TM is built to work quickly, effectively and quietly. ZODIAC, a leading manufacturer of automatic pool cleaners, has designed the Baracuda G3TM to clean your inground pool more thoroughly, effectively, and economically than ever before. No other automatic pool cleaner is built better. So, don't take a chance on another pool cleaner, tell your ZODIAC dealer or pool professional you want the cleaner that will clean your pool like never before...the Baracuda G3TM. The choice has never been so simple.

Click here for more information about Baracuda G3 Automatic Cleaner

Read More...

Pool Vacuum for Gunite Pools- Hayward Navigator Review

Average Reviews:

(More customer reviews)I have had this puppy in my pool for 7 years constant, I NEVER take it out, it runs 8 hours a day, 7 days week, 365 a year (I'm in Florida). Sure it needs regular parts, and the newer replacement parts from Hayward DO last longer, it's not a great wall climber if you let the part get worn, wings and shoes are at least a seasonal (about $30) replacement. Make sure you have good vacum as well, if you have trees around your pool, get a leaf basket. After an over night storm I have seen it clean a pool completly in 3 hours...and you know, that wall climbing is not such a bad thing, most stuff is on the bottom anyway. Sure it will not do steps and it will get hung up on ladders...I'm not sure what you expect...However, you can get a device that keeps it off ladders. I like this little feller, he works hard and well, I am just buying a new one for my home up north and ditching my expensive Polaris! (oh by the way, you can get a complete set of all moving parts, innards the lot for around $120)

Click Here to see more reviews about: Pool Vacuum for Gunite Pools- Hayward Navigator

Features exclusive SmartDrive programmed steering to assure a clean pool in only three to four houHayward Navigator Suction CleanerSetting a new standard for high-performance cleaningFeatures exclusive SmartDrive programmed steering to assure a clean pool in only three to four hours. Unique turbine/gearing system provides constant and balanced water flow for quiet operation and gentle movement across the pool bottom. Includes 40' hose and attaches easily (without tools) to your skimmer in less than 10 minutes.

Click here for more information about Pool Vacuum for Gunite Pools- Hayward Navigator

Read More...

Pool Vacuum from Polaris - ATV All Terrain Review

Average Reviews:

(More customer reviews)I have a small pool and did not want to install a seperate pump for the cleaner.
This vacuum is all it is advertised to be and more. The hook up is easy. 10 minutes out of the box should be enough.
I highly recommend this cleaner.

Click Here to see more reviews about: Pool Vacuum from Polaris - ATV All Terrain

The ATV's impressive speed and effectiveness quickly clean floors and walls of in-ground pools. Built-in reverse drive frees it from obstacles and allows it to clean in reverse. Designed with an auxiliary inlet to keep water flowing even if the throat gets clogged. The flow regulator also optimizes and adjusts flow to the cleaner. Connects easily to pool skimmer or dedicated suction line.

Get 28% OFF

Click here for more information about Pool Vacuum from Polaris - ATV All Terrain

Read More...

Baracuda G3 W03000 Advanced Suction Side Automatic Pool Cleaner Review

Average Reviews:

(More customer reviews)After installing a 14x28 11,000 gallon in ground pool 5 years ago, (using the common in Florida 15 year vinyl liner type, but with reinforced fiberglass walls behind liner and cement floor under liner, and 5 ft fiberglass steps), we followed all advice forums offered to keep pool clean. It's tough in hot Florida, (no screen enclosure), where water temperature is near 90 seven months out of the year.
Was going through two 2.5 gallon jugs of liquid chlorine a week. Have an Energy Saver 2 speed pump, but on low speed, even after 12 hours a day, pool would be nasty after only a couple days. Ended up having to run the Energy Efficient pump on high speed 6 hours a day, and even then, pool was never really clean looking. Suffered like this for 4 years, and the pool was already starting to show signs of wearing out.
Bought the Barracuda G3 on sale, mainly because I was tired of cleaning pool every other day. I would kick myself if I could. Should have had this from day 1. Writing this review after 10 months of use, so that to me, is accurate of what to expect. The G3 is connected and in the pool 24/7, unless we are in the pool, then we remove it. It has enabled us to run the pool pump on high speed for only 3 hours a day. No other work is needed. Chlorine use dropped to less than a jug a week, or less than 1/2 of what we used before. The lower chlorine use saves us about $20 a month, and the lower electrical usage for the pump saves us another $20 a month or a total of $40 a month! The best part is the pool now looks like new again. I never need to brush it or do anything except occasionally empty the pump basket. 3 hours a day of G3 takes care of it all. While it has no problems going from the deep end 6ft depth to shallow ends 3ft depth, it does not stay on the side walls very long, perhaps only for about 6 feet at a time before moving back to bottom cleaning.
The hose would go into 3 step area and cause the G3 to hang. Solution was to hang a small one foot wide PVC board from end of steps grab rail. The hose "loop" now hits this board, and instead of going into step area, it forces hose out, which then keeps the G3 moving along fine.
To get the G3 to work properly requires an initial few hours testing. First, make sure you temporarily use the included flow rate indicator at end of hose, then adjust range to around the middle of scale. Move the spring load part that fits into your skimmer to get more or less flow until indicated correct. Make sure main drain is off and returns are adjusted properly, so that they do not force hose (and therefore the G3) to move into wrong areas. Make sure filter is clean. If it starts to get dirty, the G3 will not work properly. I use a 300lb sand filter with 150lb of Zeobest instead, and it rarely needs cleaned (backwashed). You must adjust the weight on the hose. It should be positioned about 1/2 way onto the last section of hose. You also need to turn the weight for final, precise steering of the G3. Try turning the weight 1/4 turn at a time, and watch the G3 for 10 to 20 minutes to see results. Turn weight and repeat until entire pool is covered. Note that when you do remove the G3 or disconnect the hoses, you change the weight to G3 relationship, and you must again spend some time to re-adjust the weight. It must go together exactly as it was taken apart (even position in skimmer) to avoid adjustments.
I also had to remove the guard wheel that is supposed to prevent it from getting stuck. It would get stuck on ladder and steps with guard installed. Removed and it now runs fine.

Click Here to see more reviews about: Baracuda G3 W03000 Advanced Suction Side Automatic Pool Cleaner

The Baracuda G3 from Zodiac cleaner will thoroughly clean your in ground pool floor and walls to automatically remove dirt, debris, bugs, twigs, leaves, sand and even pebbles. Its bumper fin anti-stick design ensures that it will reach your entire pool because it navigates around steps, ladders, and corners ensuring maximum coverage and increased maneuverability. It is one of the most pool-owner-friendly cleaners ever made. The Long-Life Diaphragm is the only operational moving part, with no gears, wheels, or flappers it ensures quiet, simple operation and low-cost maintenance. If it should ever need service, its patented Quick Release Cassette has easy access to the diaphragm letting you remove it, replace it, or service it yourself poolside. The Baracuda G3 also has the Flowkeeper; a compact self-adjusting flow control valve that automatically regulates water flow, ensuring peak performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch and cleans when your pump runs. The unit hooks up to your skimmer and is driven by your pump and filter system. It is pre-assembled, requiring no tools or special plumbing to install, operate or maintain. The Baracuda G3 includes 39-feet of hose and a 2-year limited warranty against manufacturing defects and wear and tear.

Get 52% OFF

Click here for more information about Baracuda G3 W03000 Advanced Suction Side Automatic Pool Cleaner

Read More...