Showing posts with label deadbolt. Show all posts
Showing posts with label deadbolt. Show all posts

Baldwin 85360.003.ENTR Blakely Emergency Exit Handle Set with Egg Knob, Lifetime Polished Brass Review

Baldwin 85360.003.ENTR Blakely Emergency Exit Handle Set with Egg Knob, Lifetime Polished Brass
Average Reviews:

(More customer reviews)
This is a very nice entry door handle set. The only problem we had with this set was that the door strike plate would not catch the door knob latch allowing the door to come open. The door installer replaced with another strike plate and it works wonderfully. The set is well built and sturdy. I am very pleased with this purchase and hopefully it will last a long time. I would recommend the Baldwin entry set and would use Amazon again.

Click Here to see more reviews about: Baldwin 85360.003.ENTR Blakely Emergency Exit Handle Set with Egg Knob, Lifetime Polished Brass

Baldwin 85360.003.ENTR Blakely Emergency Exit Handle Set with Egg Knob, Lifetime Polished BrassBaldwin Blakely Emergency Exit Handle set with Egg Knob, Lifetime Polished Brass 85360.003.ENTR. Single cylinder entry handle set with a knob on the interior. Key operates deadbolt from outside; turn piece operates deadbolt from the inside. Inside lever retracts latch and deadbolt simultaneously for quick exit.Baldwin 85360.003.ENTR Blakely Emergency Exit Handle Set with Egg Knob, Lifetime Polished Brass Features:; Single cylinder; Egg knob; Fits 2-3/8-Inch or 2-3/4-Inch backsets; For use on 1-3/4-Inch thick doors; Handle CTC: 6-1/2-Inch

Buy NowGet 46% OFF

Click here for more information about Baldwin 85360.003.ENTR Blakely Emergency Exit Handle Set with Egg Knob, Lifetime Polished Brass

Read More...

Kwikset Signatures SmartScan Biometric Deadbolt in Satin Nickel Finish #908 15 SMT CP Review

Kwikset Signatures SmartScan Biometric Deadbolt in Satin Nickel Finish #908 15 SMT CP
Average Reviews:

(More customer reviews)
Initial impressions:
* Installation is fairly straightforward. If you're replacing a deadbolt, this shouldn't take much time at all (maybe half an hour). Kwikset even has an online tutorial to help out. If this is a new installation, as it was for me, having a 1" wood bit really helps (rather than using a 5/8" twice and boring those snowman-lookin' holes that you need to chisel out). Even with new installation, it's easier than installing a double-cylinder deadbolt.
* Once installed, this thing is fun to mess around with. When your fingerprint is recognized, it sounds like a coffee burr grinder for about a second, as it locks or unlocks the door.
* Because this unit scans deeply, if your finger is cut or dirty, you will still be recognized. Because of the deep scan, a photocopy of your fingerprint will not be recognized.
* "Swiping" technique is a learned trait. It took me 5 tries before it learned my fingerprint. It took my wife 7 tries (Ha! I win!). Our 4-year-old son still hasn't been able to do it. The device needs 3 good scans, with all of your finger "swipes" at relatively the same speed. Once recognized, you need to be able to replicate that motion to get the door to unlock. This can be troubling at first (even though the key will let you in, should you get sick of trying). On the first day of operation, getting this thing to work was sort of a grab bag. Today (1 day after installation), neither my wife nor I have had failures. Our son doesn't want to try anymore (he's still not recognized in the system).
* If you are installing this on an exterior door that has windows, you might want to consider a double-cylinder lock instead. A thief could smash the window and easily open this lock, due to the interior lock being a turnbolt. Of course, that's why you have a big, angry dog in your house.
* The interior unit may be larger than most would like, although it accommodates the Intel chip and programming functions. Not too bad though. It looks very similar to one of those screwy little door-mounted doorbell ringers... the kind where you turn a twisty-knob on the outside, and the inside box makes a mournful, yak-choking-on-an-apple sound.
* The interior turnbolt is stiff. This is due to your turning not only the bolt, but the gears that drive the automated lock function. Our child, who is really strong, cannot turn the inside bolt to leave the house without a ton of grunting, leverage, and requests for a ball-peen hammer. In case of fire, this could preclude a smooth exit from the house for young ones.
* I've gone through the easy-to-follow menu on the lock, and can't wait to scan in friends/family who visit from out of town. They'll have access for as long as I want them to, then I'll disable their scan. Our babysitter is scanned in, and has access only on Tuesdays and Thursdays from 3PM to 9PM. You can modify each user's settings to give them the access you want (or don't want).
* This thing comes with SmartKey technology. It took me a while to figure out what this meant, but in about 6 seconds, I was able to key both of my new deadbolts to a Kwikset key that I already have on my key ring. The keys that came with these units are now worthless (by design). This turned out to be very handy.
Overall, a very techno-cool functional lock that offers ANSI-1 and bump-guard protection. The only modifications I would prefer to have would be to do away with the interior turnbolt altogether and use a scanner/key to throw the bolt from the inside. --------------
Follow-up (1 month after installation):
* Still a pretty cool lock, but I've deleted my fingerprint twice (on purpose) to load an image that is more in line with how I've been scanning my finger. My wife has little trouble getting these locks to recognize her imprint on the first or second go, but I sometimes try 4 or 5 times unsuccessfully, and then just use the key. When I rescan my finger, I tend to have better luck for a while thereafter.
* Based on the above, I wonder how quickly I could get into the house in an emergency. My wife could probably pop right in, but I'm slightly perturbed by either my inability to scan correctly, or the unit's inability to recognize my print. My finger is large and doesn't "fit" along the scanning window as well as her does, which *may* be related to success rates. Still, I know that the unit works well enough for my wife to be happy with it. I'll keep trying.
* All in all, I'm still happy with the purchase.
--------------
Follow-up (>1 year after installation):
* Still having difficulty getting the lock to recognize my finger swipe, and still carry keys whenever I leave the house (I have one unit on the house and one on my office/studio, 50' from the house). I find that when I reprogram the unit with a new finger swipe, all goes very well for a month or two, but then need to reprogram again. Also, if my hands are damp (even slightly) it will not recognize my scan, and will sometimes not engage the lock (unless I use a dry finger after wiping off the "eye" of the unit), which is something that anyone can do, regardless of whether their scan is in the unit (3 taps on the eye engages the lock).
* I am no longer enthusiastic about the unit, although I will say that there have been many times where I've been very happy with its functionality, especially when I'm carrying packages and can't dig around for my keys. Conversely, when it refuses to unlock the door, I cuss it up and down.
* I am happiest about the general ease of locking the door with a series of taps, but grow tired of trying to unlock the door with my fingerprint.
* Initially, I couldn't help but think that I was doing something wrong, but after a year of use, I can only conclude that the unit needs improvement.
------------------
Follow-up (>2 years after installation):
This lock is not my friend. My success rate is 10 - 15%, and I only use its features to lock the door. I cannot recommend this lock.

Click Here to see more reviews about: Kwikset Signatures SmartScan Biometric Deadbolt in Satin Nickel Finish #908 15 SMT CP

Grade 1 security. Keyless biometric fingerprint scanning deadbolt with Smart Key cylinder. No hard wiring needed. Powered by 4 "AA" batteries. Swipe your fingerprint to lock or unlock the deadbolt. Program up to 50 fingerprint with full or limited access.

Buy NowGet 49% OFF

Click here for more information about Kwikset Signatures SmartScan Biometric Deadbolt in Satin Nickel Finish #908 15 SMT CP

Read More...

Baldwin 85315.003.ENTR Logan Sectional Trim Handleset with Classic Knob, Lifetime Polished Brass Review

Baldwin 85315.003.ENTR Logan Sectional Trim Handleset with Classic Knob, Lifetime Polished Brass
Average Reviews:

(More customer reviews)
Good, high quality hardware.Solid brass knob gives it a nice heft. Dead bolt plate has substantial anchoring, not as good as Medco but still very good. It resisted a jimmying attempt at my house. Don't put this on cheap door or if you plan to move within the next few years. It will last a long time.

Click Here to see more reviews about: Baldwin 85315.003.ENTR Logan Sectional Trim Handleset with Classic Knob, Lifetime Polished Brass

85315.003.ENTR Finish: Lifetime Polished Brass Shown in Satin Nickel Features: -Sectional trim single cylinder handle set. -Logan collection. -Available in: -Lifetime polished brass finish. -Oil rubbed bronze finish. -Venetian bronze finish. -Satin nickel finish. -Distressed oil rubbed bronze finish. -Distressed venetian bronze finish. . -Universal backset latch and deadbolt. -Fits 2.375'' or 2.75'' backsets. -6.5'' Handle CTC. -For use on 1.75'' thick doors. -5 Pin cylinder. -Classic knob. -Overall dimensions: 20.3'' H x 4.8'' W x 4.5'' D. For more information please view the sheet(s) seen below: Handle Set Installation Guide 1 Handle Set Installation Guide 2 Installation Guide 3 Installation Guide 4

Buy NowGet 35% OFF

Click here for more information about Baldwin 85315.003.ENTR Logan Sectional Trim Handleset with Classic Knob, Lifetime Polished Brass

Read More...

LiftMaster 3800 Residential Jackshaft Garage Door Opener Review

LiftMaster 3800 Residential Jackshaft Garage Door Opener
Average Reviews:

(More customer reviews)
I installed this LiftMaster 3800 opener in my garage over this past weekend. It took a couple of hours in total, not because the installation is terribly complicated but just because there's a lot of little things to do during the installation. The instructions are very thorough and accurate and the opener works extremely well.
When I got home last night, after using the opener for 3 days, I noticed that the light was no longer working. I checked the power to it, replaced the bulbs and attempted to reprogram it. Bottom line is that the light simply stopped responding to commands from the head unit and the wall-mounted control. Unlike conventional garage door openers the light is 'wireless' in that it receives commands to turn on and off remotely. You simply plug it into an outlet anywhere in the garage. This, evidently, was a scenario Chamberlain's customer service was not prepared for. Despite giving them my model number the representative could not come to grips with the fact that the light was not part of the motor assembly. After providing her the model number of the light itself we began to make progress. However, once we reached a point where there was no more troubleshooting to be done and the light still did not work there was an awkward silence. After about 10 minutes of this silence (though I could hear voices in the background) I asked if she was still there. She said yes and that she would need to talk to a supervisor. She did and the supervisor wanted me to 'hard wire' the wall mount to the motor assembly. She could not adequately explain to me what that meant. The wall control IS hard-wired to the motor, albeit with 30-feet of wire. All other functions of the wall control work so I knew that wasn't the problem. The motor assembly is 11-feet off the ground and I wasn't about to dig out the ladder, move the car and climb up there knowing full well that nothing I did to the motor assembly was going to fix that light. After multiple requests the supervisor refused to speak with me and they reluctantly agreed to replace the light. In total I had over an hour invested in that phone call.
Back to the review....I really wanted to ding the opener for my poor customer service experience. But that wouldn't be fair. With the exception of this light problem, I am so impressed with this opener that I need to give it 5 stars.
The opener is extremely quiet and smooth. I replaced a Craftsman chain-driven opener with this Liftmaster 3800 and the difference is like night and day. My bedroom is above my garage so it's important to have a quiet opener that is NOT mounted to the ceiling (which is obviously the bedroom floor). The door opens substantially faster than the conventional opener I replaced and slows to a graceful stop just before the preset travel limit. On the down cycle the door closes at the same rate as the old opener.
The standard package of features with the opener is outstanding. It comes with a nice, blue-backlit LCD wall controller that displays the time and temperature. The wall control gives you status messages and also contains a motion detector that turns on the lights when you enter the garage. You can also program new remotes using the wall control rather than having to climb up and hit the 'learn' button on the motor unit (though you could do that if you wanted to). The remote control that comes with the unit has nice, blue LEDs that illuminate when it senses that your hand is near it. This is great when you're fishing around your console in the dark for the remote. Last, the dead bolt feature is a nice added security option.
Installation is not complicated. The hardest part was installing the collar that connects the motor shaft to the torsion bar assembly. They use some sort of super-duper thread lock that makes it difficult to turn the bolts. They have Allen's heads so make sure you have a sturdy, hardened Allen's wrench. There is not a lot of room, either, so take the advice in the instructions and position the collar in a manner that allows you to get at all the bolts. The only tool required that the average handyman might not have is a 3/4" metal bit for drilling the dead bolt hole. That's a big bit and most drill bit sets only go up to 1/2".
Programming is simple if you follow the instructions. I easily programmed the door stops in a matter of minutes and it self-learns the force limits based on a full cycle of door operation. The opener is Homelink compatible and I programmed both my vehicles to operate the door without any trouble.
Last, a word to the wise, most accessories for the door start with the number "3". I ordered a keypad and keyfob remote for the door and both were incorrect. Just because a device says it's SECURITY + compatible doesn't mean it works with the 3800 opener. Make sure you get a device that works with SECURITY + and is also for openers with a PURPLE learn button.


Click Here to see more reviews about: LiftMaster 3800 Residential Jackshaft Garage Door Opener

Wall-mount installation - mounts on the left or right side of door. No rails to hang, it simply mounts on the wall and attaches to the garage door torsion bar. Unit requires an electrical outlet within 6 feet. Patented absolute positioning technology - the newest technology in garage door openers. Liftmaster patented design allows the electronic limits to be extremely accurate, even after a power failure. Optional accessories: 475LM Battery Backup, 377lm Keyless Entry Pad, 379lm Fingerprint Keyless Entry,975lm Garage Door Parking Assist, 370lm Mini Remote. IMPORTANT NOTE: BEFORE PURCHASING, PLEASE VERIFY THE 3800 WILL FIT YOUR APPLICATION BY CONTACTING CHAMBERLAIN. TO RECEIVE IT AND THEN SHIP 33LB PACKAGE BACK TO SELLER IS INCONVENIENT.

Buy Now

Click here for more information about LiftMaster 3800 Residential Jackshaft Garage Door Opener

Read More...