Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser Review

Average Reviews:

(More customer reviews)I purchased this saw today after weeks of shopping around. It seems that all of the contractors I spoke with have the 8 inch Hitachi slider and swear by it. I was looking for a bit more capacity but with the same reliability, accuracy and the advantage of a laser guide. This saw is extremely well made and accurate out of the box. While it has a bit more plastic than it's 8" counterpart it is still made like a tank at less weight than the competition(44lbs I believe). The slide, bevel and miter functions are all smooth and the preset angles are easy to set but not to stiff that they don't allow you to set angles close to the presets without accidentally "clicking" into them when tightenned. The fence seems to be improved over previous models and is a bit higher. It will also flip out for longer workpieces. As for the laser guide, I was skeptical of their accuacy but I couldn't be more wrong. It was dead on out of the box and easily adustable depending on you personal preferences. Some people seem to have complained that the laser line disappears as soon as the blade is lowered, but it is so accurate that it doesn't matter. Once you match your laser to your line, there is no need to follow it through the actual cut.
There is not one flimsey piece on this tool. While not overly heavy, it is very solid. The only drawback to this saw that I can see is the relatively small table area. If however weight and portability is important to you, this could be seen as an advantage. The standard blade is acceptable but the 72 tooth blade that comes as a "bonus" is excellent. Some people have complained about the dust collection. I found it to be adequate but not great. In all fairness, I have never had a tool with a system that was much better. I have heard that the rear rubber blade guard (to aid dust collection) has problems when using a powerful vac. for the collector but I have not tried that yet. If you are looking for a slide compound miter saw with a laser, this is the only one as of now. Compared to other quality 10" sliders, the Hitachi C10-FSH is priced towards the high end of the scale at between $499 and $530 but based on my initial impressions, worth every penny.

Click Here to see more reviews about: Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser

The Hitachi C10FSH 10-Inch Sliding Dual Compound Miter Saw with Laser Marker provides smooth, accurate miters and crosscuts in a variety of workpieces, including wood, plywood, decorative panels, soft fiberboard, hard board, and aluminum sashes. An ideal tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C10FSH offers professional-grade performance with its laser marker, dual-bevel cutting action, soft start function, electric brake feature, electronic speed control, and more.
The carbon brush and dust-collector bag keep the saw working for the long term. Powerful Motor Provides Smooth, Accurate CutsThe C10FSH Sliding Dual Compound Miter Saw features a powerful 12-amp motor that generates a no-load speed of up to 3,800 RPM for easily making crosscuts and miters in even the toughest workpieces. The electronic speed control ensures consistent RPM throughout the cut, so you get smooth, precise, controlled cuts each and every time.
Additionally, the C10FSH utilizes a Poly-V-Belt transmission rather than a traditional gear transmission. This soft start technology allows the saw to operate smoothly and quietly and reduces recoils during startup.
Compound Feature for Precise Miters and Bevels Hitachi designed the C10FSH for versatile, easy use. The thumb-actuated positive miter stops allow for simple miter adjustments at the most common angles: 15.0, 22.5, 31.6, and 45.0 degrees to the right or left. The tool also features a 57-degree miter angle to the right and a 45-degree miter angle to the left for maximum flexibility. Additionally, a white-on-black miter scale provides superior visibility, allowing you to easily adjust the angle of the cutting blade for creating miters in crown molding and other trim pieces.
And with a bevel range of 45 degrees to the left and right, you can quickly and easily flip the saw blade while leaving your material in place. To save you even more time, bevel stops to the right and left are conveniently located at zero and 45 degrees.
The 10-inch TCT saw blade (included) makes easy work of trim and other woodwork, and the linear ball-bearing slide system and adjustable pivot fence allow for accurate cutting of large workpieces over 12 inches deep.
Laser Marker Technology for Perfect Cuts EverytimeHitachi equipped the C10FSH with its exclusive Laser Marker System, which can be activated before the blade is in motion for exact alignment and predictable blade placement. The laser marker is easily adjustable to suit your preferences, simply line up the laser with your mark on the workpiece, and the saw blade will make an exact cut along the laser guide. As long as your measurements are right, your cuts will be, too!
Chock-Full of User-Friendly FeaturesThe C10FSH contains plenty of features to help you make the perfect cut the first time. To start, a splinter guard behind the fence increases safety and reduces tear-out for clean, finished cuts. A patented, fully adjustable chip deflector also prevents tear out, aligns the cutting line, and provide zero-clearance support.
For further refinement, a large table provides a stable guide and sturdy support, a built-in clamping system holds your workpiece in place, a comfortable vertical handle with a vibration-reducing elastomer grip keeps you in control, and an electric brake feature quickly halts the blade to prevent unintended cuts.
The C10FSH also includes a dust collector that minimizes accumulation of dust and particles in your both your workspace and the saw's interior components, keeping your jobsite clean and prolonging the life of the tool. An added bonus, easily accessible carbon brushes will help your saw perform for the long term.
Durably built, this tool is backed with an industry-leading five-year warranty. It is compatible with Hitachi's UU610 Universal Work Station.
About Hitachi: A Tradition of InnovationHitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry, including creating the first-ever sliding compound miter saw to combine the capacity of a radial arm saw and the convenience of a miter saw. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.
What's in the BoxC10FSH 10-Inch Sliding Compound Miter Saw with Laser Marker, 10-inch TCT saw blade, box wrench, dust bag.

Get 53% OFF

Click here for more information about Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser