Average Reviews:
(More customer reviews)I do not want to repeat what all the other reviews have said. This is a quality compressor. In this day and age of plastic junk, I am surprised some of the reviews complained about wieght. The weight comes from steel, not plastic parts. The tanks are heavy steel as is the roll cage around the entire mechanism. The handle is in the center, so carrying it is well balanced.
The compressor is just as quiet as others report. I have it in the corner of my workshop about 10 from me. The start up instructions are easy and you are up and running in 20 minutes.
Why did I get this compressor? In sum, (1) I wanted a GOOD quality tool that was not Chineese junk, (2) I wanted at least 4 cfm for tools and (2) I did not want to spend a fortune. There seems to be several classes or levels of compressor in the lower price range. Unless you are getting a specialized mini-compressor just for a small brad gun, the $125-175 compressors are mostly junk: loud and rough. This Makita is in the next step up, with compressors in the $225 to 325 range. There are some Dewalt Emglo and others I looked at in this range. Most of this second tier are either made for just for job sites or are just bigger cheaply made compressors.
I chose the Makita over the Dewalt for one reason: quiet. The Dewalt is an excellent compressor, but you cannot use it next to you in an exclosed shop -- its too loud.
So, I wanted a quality tool and one that could live in the shop next to me. The Makita does both in spades. It is a very well made little compressor. The fit and finish is great. It has a dual personality: it works and looks great in the corner of the shop AND is perfect for taking to a job site or the back yard. Best of both worlds.
The compressor seems to live up to its specs. I have easily run 3/8 and 1/2 inch impact wrenches, a brad gun and a finish nail gun, along with blow guns, etc. When I went to use a Snap-On 7200 3/8" air ratchet, the performance was just adequate. Then I read the spec for the ratchet and it calls for 4.5 cfm. The Makita is rated at 4.2. SO, you do have to watch the cfm ratings on tools: I am sure a 8 cfm jitterbug sander will not work. But then again, that is not the type of tool I wanted this for.
I have not owned a compressor is many years. I looked long and hard for the best of all worlds: quality, size, price, and cfm. As an advanced and serious home workshop dude, this review is not written for the pros. But for a serious homeowner that appreciates quality tools and needs a general purpose compressor, I believe I found the perfect compressor.
Lastly, no shop came close to Amazon on total price, in large part due to the free shipping.
Click Here to see more reviews about: Makita MAC2400 Big Bore 2.5 HP Air Compressor
Makita's 2.5HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.
2.5 HP with Big Bore Engineered PumpThe MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.
Versatile Design for a Range of ApplicationsThe MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita's commitment to innovative technology and best-in-class engineering.
About Makita Big Bore Air CompressorsMakita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.
About MakitaMakita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.
WarrantyEvery Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.
What's in the BoxMakita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler.
Get 37% OFF
Click here for more information about Makita MAC2400 Big Bore 2.5 HP Air Compressor
0 comments:
Post a Comment