Average Reviews:
(More customer reviews)This is the second Jet drill press I have owned. The first had the same problem as the second and Jet replaced it free of charge, even though out of warranty. I have owned this drill press for just over two years now and it is used but not abused. The problem is that after using the depth stop, as is the case with a good majority of holes the spindle kicks over to the side of the drill press that the stop is mounted on. This has a tendency of causing drill walk as well as an out of round condition of the hole itself. After grabbing and shaking the quill a great amount of play is noticable from just hand force. This would indicate worn bearings. The fact that the first drill press had the same defect as this one tells me that Jet knows it has a problem but evidentally isn't that concerned about fixing it. I have owned and still do own other Jet tools but this drill press is the worst. Vibration and noise are other built in features you might encounter. I will replace it soon and doubt that the new one will have the Jet logo on it. Take a second look it might be worth your while.
Click Here to see more reviews about: JET JDP-17MF/354169 Drill Press
354169 Model Code: AB (part# 354169)This item features: -Adjustable depth stop. -Phase: Single. -Voltage: 115.00 VAC, 230.00 VAC. -Chuck to Table Distance: 29 1/8 in. -Tilt: 45[Max]. -Type: Standard Drill Press. -Price is for 1 Each. Testing and approvals: -CSA. Model Code Model Description AACutting Cap.:1 in (steel) [Max], Bit/Blade Mounting Size Symbol:Morse #3, Chuck Size:3/4 in, Speed:150 rpm [Min], 4200 rpm [Max], Power Cap.:1 1/2 hp [Max], Control Type:On/Off - 12 Speed, Stroke Length:4 5/8 in, Center to Side Distance:10 1/4 in, Chuck to Base Distance:46 3/4 in, Table/Plate Length:18 5/8 in, Table/Plate Width:16 1/8 in, Wt.:288 lb ABCutting Cap.:5/8 in (steel) [Max], Bit/Blade Mounting Size Symbol:Morse #2, Chuck Size:5/8 in, Speed:200 rpm [Min], 3630 rpm [Max], Power Cap.:3/4 hp [Max], Control Type:On/Off - 16 Speed, Stroke Length:4 3/8 in, Center to Side Distance:8 1/4 in, Chuck to Base Distance:49 in, Wt.:178 lb
Get 17% OFF
Click here for more information about JET JDP-17MF/354169 Drill Press
0 comments:
Post a Comment