Average Reviews:
(More customer reviews)Purchased this jointer over a Jet. Assembly was easy and the directions precise no missing parts. Degreasing the machine was a bear dont be afraid to spare the brake clean and shop rags. Set up after assembly was not bad. Belt alignment was a little tough because the motor moves up and down and laterally at the same time, but after first blood no problem. The fence was easily squared to table and the fence adjustments are simple and work well. The tables are flat to within acceptable tolerances (.005). The outfeed table was a bit tough to adjust, the adjustment wheel was difficult to move but once freed up the adjustment went quick. The knives from the factory were set perfectly. Once switched on you can hardly tell this machine is running. Smooth cuts are effortless and I have plowed through 16/4 maple and cherry with fine results. When working with 3/4 or 4/4 stock this machine isn't even breathing and the edging is flawless. I just completed two cherry tables and it is hard to tell were the joints are. I have had great results with up to 8' long stock for any thing over this the tables are short and snipe a bit. Overall it is worth the price and I do recommend this jointer, how can you miss with a five year warranty. My shop has a variety of tools and I will consider Delta for my next purchase.
Click Here to see more reviews about: DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase
The DELTA 37-275X X5 professional 6-inch jointer includes a 1-horsepower motor and dual-sided tilt that easily handles your tough rabbeting, edge, face, and tapering jointing projects. The jointer features a three-knife cutterhead that works smoothly at 4,800 RPM to create 14,400-cuts per minute. The table comes in at just under four-feet long with a fence featuring positive stops at 45- and 90-degrees. The adjustable infeed table is controlled by lever rather than handwheel. The jointer operates with a maximum width of 6-1/8-inches and a depth capacity of 1/8-inch. The six-inch jointer comes with an induction motor, enclosed stand, center-mounted fence, three-knife cutterhead, dust collector, and push blocks.
Get 42% OFF
0 comments:
Post a Comment