Average Reviews:
(More customer reviews)This is an outstanding piece of woodworking machinery. Other than a few unclear illustrations, I had no assembly issues & was able to get it set up, rewired for 220V, and dialed-in by myself in a few hours. It's heavy, but it was not very hard getting the saw onto the stand alone. I also installed the riser block to increase resaw capacity which I highly recommend. The upper arm of the saw is heavy & hard to get a good place to get a grip, so it took a little muscling to get the riser block installed. "Goof-Off" (available in local home centers & hardware stores) worked well to remove the anti-rust shipping coating on the tables. As you might expect, the "included" blade is junk.
I seriously considered the Laguna 14SE but could not justify the additional $400-500. I admit that I probably over research before buying machines for my shop. Check out the Delta, Grizzly, Jet, Bridgewood, and others. On the Powermatic, the fit & finish is way above the competition. Power, weight of castings, weight/design of flywheels... the list goes on and the Powermatic gets the points - this is a top choice among 14" bandsaws.
Power is NOT an issue. The Baldor motor is a tank. It runs very quietly - the sound makes you realize that you're about to operate a real piece of equipment. Roller blade guides take a little setting up when you change blades, guard height, etc. but they work very well. Dust collection is also very good. Fence is dead on accurate and tables are machined to near perfection. Carter quick tension release is fantastic! Chip blower works as it should.
As mentioned by another reviewer, if you rewire the motor to 220V you will need a 220V bulb... Philips 50A RS 250V available at mscdirect.com
The delivery/setup/operation of this machine has been a five star experience! THANKS to Amazon/ToolCrib, ABF Freight Systems & The WMH group for fine service and a fine product!
After having just pattern cut 10/4 white oak like it was 3/4" pine, a simple blade change/rentensioning for a Woodslicer resaw blade means it's time to go and make more 10" wide cherry into 1/32" veneer slices!
Go for the "gold standard." Buy it, you'll be happy you did.
Click Here to see more reviews about: Powermatic 1791216K Model PWBS-14CS Deluxe 14-Inch 1-3/4-Inch Woodworking Bandsaw with Bearing Guides, Lamp, and Chip Blower, 115/230-Volt 1 Phase
With an extra large, two-piece cast-iron table and balanced nine-spoke cast-iron wheel, the Powermatic PWBS-14CS 14-Inch Woodworking Band Saw is a capable, user-friendly machine ideal for professional woodworkers and hobbyists. Its rugged design offers uncompromising accuracy and durability; while a host of innovative features let users tackle a range of heavy-duty jobs with precision and control.
Solid, Sturdy Backbone for Vibration-Free OperationA huge iron casting provides a solid foundation that keeps the PWBS-14CS rigid and vibration free.The heavy-gauge, steel base cabinet adds to the unit's overall stability and provides a solid,vibration-absorbing base for the motor. Because dust collection does not pass through the base cabinet,its interior remains virtually dust free, reducing routine maintenance while enhancing the long life of the motor and drive belt.
To help improve visibility and the air quality of your shop, the PWBS-14CS features a four-inch diameterport cast into the lower housing, directly below the blade, for effective dust evacuation. And tokeep the cut line clearly visible, an integral air pump supplies pressurized air to an adjustable nozzleattached to the upper blade guide, resulting in a chip blower that provides a clear line.
Extra-Large Work TableTo effectively handle projects both big and small, the PWBS-14CS features an extra-large,two piece cast iron table with a tilting section measuring 15.0 x 15.0 inches and a fixedextension measuring 15.0 x 5.0 inches for a total working surface area of 15.0 x 20.0 inches.
Optimum Power and DriveThe PWBS-14CS is powered by a one and one-half-horsepower TEFC (totally enclosed fan cooled)industrial-style motor that comes wired for 115-volt operation, but can be converted to 230 volts.The motor power is delivered through a set of precision-machined multi-groove pulleys that aredriven by a poly-V drive belt system, known for its smooth, efficient transmission of power withvery little temperature buildup.
For their part, the cast-iron drive wheels are fully machined,painted, and fitted with high quality tires and then dynamically balanced to ensure smooth operation.
Easy AdjustmentsWith the PWBS-14CS, adjustments are never a problem, due to the blade width markings on thetensioning block for blade widths from one-eighth- to three-quarter-inch. The infiniteadjusting system also lets users dial in the correct tension for specialty blades that mayrequire non-standard tension settings.
This model comes with the legendary, Carter quick-release handle assembly that features three positions:full tension, relaxed tension, and full release. Users can move the Carter between all three positionswithout losing the tension setting, potentially lengthening the life of the blade.
User-Friendly FeaturesThe PWBS-14CS also includes an exclusive design, quick-release, precision T-square-style rip fence withfour-inch re-saw attachment; 60-watt adjustable lamp (bulb not included) built into the body to providedirect light on blade and work piece while cutting; and a full six-inch under-guide capacity with 13-1/2-inch width capacity.
Dimensions and Warranty InformationThe PWBS-14CS measures 34.0 x 68.0 x 20.0 inches (W x H x D), weighs 250 pounds, and is backed by a five-year warranty.
What's in the BoxOne PWBS-14CS saw body; one poly-V drive belt; one trunnion support; one main table; one extension table; two table lock knobs; one table pin; one work light; one blade hook; two fence hooks; two miter gauge hooks; one bag of fasteners; one rip fence and rail assembly; one blade tension handle; one stand with motor; one miter gauge; one pulley cover; one fence body; manual; and warranty card.
Get 24% OFF
0 comments:
Post a Comment