Average Reviews:
(More customer reviews)Installed this pump in three steps. First, installed a 115-volt outlet under the sink that was farthest from the water heater, a distance of about 50 feet. There were three other sinks and two showers all hooked to the hot water pipe that ran between this farthest sink and the water heater. Second, I insulated the hot water pipes leading from the water heater to this farthest sink. Most of these hot water pipes were located in a suspended ceiling. If the pipes were in a wall, I ignored trying to insulate them, figuring the wall was enough insulation. Third, I installed the pump under the sink. I set the timer to operate whenever I plan on using hot water in any of the sinks (i.e., 0600-2400). I have had the pump installed for about a year and appreciate it every day. When the water at the sink cools to 85 degrees, the pump cycles "on." When the water temperature reaches 95 degrees at the sink, the pump cycles "off." The water from the hot water side gets pumped to the cold water side so that the cold water is about 90 degrees, but that water cools rapidly. When the cold water faucet is turned "on," the cooler water quickly gets to the faucet. This pump is perfect for my needs.
Click Here to see more reviews about: LAING Autocirc Pump with Timer and Cord
AutoCirc Pump with Fixed ThermostatPLEASE NOTE: All AutoCirc pumps must be installed vertically. Please read all installation instructionsFeatures:Does not require a return line.Requires only 33 watts of power.Comes complete with a 6 ft. long power cord.Requires only one pump and one installation for all fixtures on the hot water plumbing line.Fixed thermostatSaves the average family of four up to 17,000 gallons of water annually.SIlent operationSaves energy, money, water and pays for itself in a short period of timeBuilt-in 24 hour timer which allows the selection of system operating periods to suit family usage.
Click here for more information about LAING Autocirc Pump with Timer and Cord
