Biesemeyer 78-955 T-Square Table Saw BladeGuard System for Fences Less Than 40-Inch Long Review

Average Reviews:

(More customer reviews)I have to admit that I was hesitant to buy a safety feature for my Delta contractor's saw, but I'm glad I did. The blade guard system is actually comprised of the actual blade guard and a splitter. The blade guard is mounted to the rear support of the existing fence by 6 hex bolts. Drilling and mounting the fence took about 15 minutes. The splitter replaces the existing one, and is an enormous improvement. First, no bracket mounting it to the rear of the saw, which makes attaching an outfeed table easier since you don't have to cut a large slot for the bracket. Second, it is attached to the saw by one large spring-loaded knob, which means you can install or remove it in about 10 seconds without fumbling with a wrench. The fence guard is large and clear, and makes it easy to see what you are cutting, and the best part is that you can cut dadoes with the guard in place. And when you don't want it in place, you just flip it out of the way. For those who like to have their router mounted in their right extension table, this would probably not be a wise investment,as it would definitely be in the way. However, for everyone else, this safety feature is well worth the money.

Click Here to see more reviews about: Biesemeyer 78-955 T-Square Table Saw BladeGuard System for Fences Less Than 40-Inch Long

The Biesemeyer 78-955 T-square Table Saw BladeGuard System for Fences Less Than 40 inches Long is compatible with the Biesemeyer BC50, BHS40, and BHS52 saw fence systems. Designed to fit most fence systems under 40 inches, this blade guard can perform non-through cutting operations without needing to be removed. And because of its overhead design, there is no mounting bracket behind the blade to interfere with molding operations or dado cutting. Features include a U-shaped support arm that allows users to cut to the full capacity of the fence and a separate, removable splitter for use during through-cutting. Also included is a see-through blade guard that allows for any blade angle. This same blade guard is counter balanced to permit perfect weight adjustments. This blade guard system includes a T-arm assembly, a blade guard, a splitter, an installation bracket, and mounting hardware.

Get 30% OFF

Click here for more information about Biesemeyer 78-955 T-Square Table Saw BladeGuard System for Fences Less Than 40-Inch Long

Read More...

HTC 10A-M30P Brett-Guard Table Saw Guard Review

Average Reviews:

(More customer reviews)I decided to invest in safety this year, and since the table saw is one of the most used machines in my shop, I started with this over-arm brett guard. I liked the design in that it acts both as a guard and a hold-down with anti-kickback built in.
I ordered this from Amazon at a very attractive price, in spite of the other review that had some problems. The unit arrived in two boxes. In mine, only a minor part was missing (the crank handle to adjust the height with). I e-mailed Amazon customer service right away, and got a somewhat confusing e-mail, probably from India. It did have the number for HTC Customer Service hidden between what looked like a disjointed cut-and-paste from some canned answers. I called HTC and got a very friendly customer service agent who took down my name and address. She was new, so it was somewhat difficult to explain the part I was missing, but she figured it out in the end. She did not ask for any other information, and I got the missing part about two weeks later.
As for the device itself, I was somewhat disappointed by what I consider some major flaws:
1. The parts, while heavy duty steel and very solid, were painted after the holes were threaded, resulting in a very difficult assembly process. This is just plain sloppy manufacturing.
2. The leveling screws in the overarm attachment are too long, resulting in difficult adjustment. Its important to level the guard to a parallel plane with your saw table because the guard also acts like a hold-down. The leveling process was made more difficult by the length of these screws.
3. The overarm support fits on the L-bracket that came with my Biesemeyer fence system (standard on the Sears 22124 table saw that I have). Unfortunately, the extension arm slides inside this support and is held in place by interference fit between some nylon screw inserts (held in place by nylon nuts and threaded connections in the steel support) and one threaded knob. It is extremely difficult to get this arrangement straight; at least I had to make five or six attempts. Combine this with the long leveling screws and, well, lets just say "words were said" and leave it at that.
On the plus side:
1. The design of the gurad allows it to flip up and out of the way for blade changes.
2. The stock splitter on the 22124 can no longer be used, so I was forced finally to buy an aftermarket splitter. The one that comes with the guard doesn't fit the 22124 and is standard thickness (I use a thin kerf blade), making it useless for me. This is only a plus in that the stock splitter/guard on the 22124 is, in my opinion, a safety issue by itself.
3. All the parts are heavy steel (except the nylon inserts/nuts) and the guard itself is a heavy acrylic clear plastic. The guard with mine had a connection (2.5 inch) for a dust collection system.
4. The crank mechanism is easy to adjust to the workpiece height. Max height is about 4 inches, which is higher than the max height of my blade on the 22124.
5. Its made in the USA. Maybe you don't care, but I'd rather employ Americans than others if the design/quality/price allows it.
Overall, I'd recommend the guard, but caution you to expect some problems along the way.


Click Here to see more reviews about: HTC 10A-M30P Brett-Guard Table Saw Guard

Get 12% OFF

Click here for more information about HTC 10A-M30P Brett-Guard Table Saw Guard

Read More...