DEWALT DW056K-2 18-Volt Ni-Cad Cordless Impact Driver Review

Average Reviews:

(More customer reviews)We use this driver for running in ½ x 12 lag bolts through pilings. This putts a lot of stress on a driver. The DeWalt has more then enough power to handle this and all lesser tasks. I have used several hammer drivers and hammer drills in my business, this is truly the undisputed "Power King"; however, after running hundreds of lags and screws I encountered a few shortcomings with the DeWalt:\
1.On two of these drivers the anvil (hammer thingy) inside stripped out in less then 3 months. On the plus side, DeWalt replaced them, no questions asked.
2.It a nightmare to get inside and replace the brushes on the work site. Combine that with the reluctance of our rep. to even get the brushes addes up to sending them in for R&R (repair and rebuild) at the cyclic rate. Time = money. I still don't know if the brushes can be replaced, how to do it, or if that is even the problem. I suspect it is due to a small amount of graphite looking dust around the air exhaust vents after long use.
All in all, not bad for hundreds of BIG lags, but to put it into perspective, we also use Makita 24 volt hammer drivers. These have run thousands of big lags with no problems at all! The Makita brushes are a few bucks for a pack and can be replaced in a minute.
My bottom line is: Get the DeWalt for lower production work that needs lots of power, but if you have your driver turning day on stay on, you might want to consider a Makita hammer driver in the 18 - 24 volt range.

Click Here to see more reviews about: DEWALT DW056K-2 18-Volt Ni-Cad Cordless Impact Driver

Offering 1,170 in./lbs. of torque for fast, effective lag screw fastening, metal work, and loosening tough bolts, the DeWalt DW056K-2 18-volt impact driver is a compact tool that really delivers. Just 6-1/2 inches long and 4.9 pounds, this impact driver provides a non-slip grip and is balanced to sit comfortably in your hand for more efficient work, plus its unique impact mechanism minimizes kickback to reduce wear and tear on your body. With two speed ranges, 0 to 2,400 RPM and 0 to 3,000 RPM for job-specific performance, a durable magnesium gear case, and an all-metal transmission, this driver is built to stand up to the demands of professionals. It also offers a 1/4-inch hex style quick release chuck so you can switch between jobs easily, and it comes with two 18-volt XR+ extended run-time batteries for dependable power. Also included with this kit is a one-hour charger and a heavy-duty kit box that protects your tool during transport and storage.

Get 46% OFF

Click here for more information about DEWALT DW056K-2 18-Volt Ni-Cad Cordless Impact Driver

Read More...

Grizzly G1035 1-1/2 HP Shaper Review

Average Reviews:

(More customer reviews)I think it is unfair to rate a tool poorly because one didn't understand the shipping policies. I agree that buying large tools via the Internet is a hassle, but that is the buyer's choice.
Now for the shaper. I love it! I don't use my router much at all since getting this shaper. I bought the router bit spindle adapter and switch back and forth easily between router bits and cutters. I recently bought a full set of cutters for raised panel doors and this tool makes life easy! One pass and you are done--nice smooth cuts.
I'm very happy.

Click Here to see more reviews about: Grizzly G1035 1-1/2 HP Shaper

Built with plenty of muscle to take on most shaping challenges, our mid-sized, 1-1/2 H.P. model G1035 Shaper offers the perfect, low-priced alternative for the serious hobbyist or small-shop owner. The G1035 offers precision wheel adjustment, two spindle speeds, a finely milled cast iron table, interchangeable spindles & sealed ball bearing movement - all for less than the price of a router & router table! Shown with optional G1706 extension wingFeatures: ' 2 interchangeable spindles: 1/2" and 3/4" ' Heavy-duty 1-1/2 H.P. 110V/220V motor ' Two spindle speeds: 7,000 & 10,000 R.P.M. ' 3" spindle travel ' Spindle openings are 1-1/4", 3-1/2" & 5" ' Table is precision-ground cast iron ' Table size is 20-1/4" x 18" ' Floor-to-table height is 33-1/2" ' Powder coated paint ' All ball bearing construction ' Maximum cutter diameter is 5" ' Shipping weight approx: 220 lbs.Standard Equipment Includes: ' Motor ' Reversing switch ' Fence with safety guard ' Hold-down springs ' Miter gauge ' Steel cabinet-type stand

Click here for more information about Grizzly G1035 1-1/2 HP Shaper

Read More...

Bosch 4410L 15-Amp 10-Inch Dual Bevel Sliding Compound Miter Saw Review

Average Reviews:

(More customer reviews)I consider myself to be an intermediate woodworker. Using various joints including dovetails, mitres, and other multifaced joints in my work. I bought the 4410l to do a house full of baseboard and some crown moulding and am very pleased with the performance of this saw. Right out of the box, which arrived in only 4 days,the saw produced machinist square cuts and absolutely "light tight" crown cuts. ALL angles came dead accurate from the factory. The laser is just a wow factor and the dust collection isn't the greatest but the cuts this slider makes are a thing of beauty and ease,even with the supplied blade. I honestly don't understand the negative reviews about accuracy with this unit. I have the 10" Bosch contractors saw and its performance was what led me to this sliding mitre saw, Bosch was up to the task again. Fit,finish,upfront controls,the micro fine adjustment was wonerful on the crown cuts,...all great. This is good saw and I recommend it highly.

Click Here to see more reviews about: Bosch 4410L 15-Amp 10-Inch Dual Bevel Sliding Compound Miter Saw

Perfect for cutting flawless crown moldings and much more, the Bosch 4410L is a 10-inch dual-bevel sliding compound miter saw that features a powerful motor and bevel capabilities to the left and right. With up-front controls and arbor-mounted laser tracking, this saw ensures you complete control over the saw for stunningly precise cuts.
Sliding fences and base extensions increase the saw's support capacity.View larger. Powerful Motor and Versatile Cutting CapacityThe 4410L's heavy-duty 15 Amp, 3 HP motor spins the 10-inch blade at up to 4,800 RPM for smooth, easy cuts. The large 21-inch aluminum base incorporates the industry's only integrated material supports extending to 37-1/4 inches in total length for handling extra-large stock. And the tall 4-inch speed-track sliding fence allows for increased crown molding cutting capacities. The saw is equipped with a fast-acting electric brake, which stops the blade within seconds for quick and easy repetitive cuts.

Up-Front Controls Keep You in CommandWith its up-front, easy-to-reach bevel-angle controls, the 4410L lets you make adjustments efficiently without having to reach around to the back of the saw. And with the saw's innovative, four-position handle, you'll experience ergonomic comfort for even more effective performance.

Innovative Features Offer Superior PrecisionYou can count on the 4410L to get the job done with a superior level of precision, thanks to its innovative Microfine Miter Adjustment Knob. In combination with the miter detent override, this feature lets you fine-tune your miter angle outside of detents to the perfect setting and lock it in for unparalleled accuracy. The saw also features an arbor-mounted laser tracking system, which provides sharply accurate laser lines for precise cutting.

Built for Long-Lasting ConsistencyBosch's exclusive Wedge-and-Slot Miter Detent System is cast into the base to enable consistent and precise miter cuts throughout the long life of the saw. The 4410L offers 11 miter detents, bevels 47 degrees to the left and 46 degrees to the right, bevel stops at 0, 33.9, and 45 degrees (left and right), and convenient crown molding stops at 31.6 degrees when stock is laying flat.

The Bosch 4410L Sliding Miter Saw measures 19 inches tall and 37-1/4 inches long, has a 5/8-inch arbor, and weighs in at a sturdy 55 pounds. It is backed by Bosch's one-year limited warranty, 30-day money back guarantee, and one-year service protection plan.

What's in the BoxBosch 4410L Sliding Miter Saw, 10-inch, thin, 60-tooth kerf blade, dust bag, elbow wrench set, and tool-free vertical work clamp.

Get 23% OFF

Click here for more information about Bosch 4410L 15-Amp 10-Inch Dual Bevel Sliding Compound Miter Saw

Read More...