Average Reviews:
(More customer reviews)I was one of the first to get the DW734 from Amazon. Other than the 3-knife head (with 2-sided disposable blades instead of resharpenable) and some styling details, the 734 planer appears to be identical to the previous model, the 733. I haven't been able to get any detailed info on changes between the two models from any source I researched.
It was set up right on the money out of the box except that the cut depth gage is off by around 1/128" (not enough to matter). I was pleased that it came with a dust hood (4"), something not listed in any of the info I was able to get before the purchase.
The cut is silky smooth--unless you look very closely in bright light on a darker wood surface (like walnut) you can't see any blade marks at all.
The machine functions very well--easy to set up, the controls operate very smoothly and precisely, and each of the features works as expected without needless fiddling. The dust hood, even though only 4", clears chips and dust very efficiently. The only time any chips escaped was when I tried to take 1/8" off of a 6" board (a no-no according to the owner manual), and then I got a little puff of shavings out the feed end. (My setup is a Jet DC1100CK 1 1/2 HP dust collector connected via a 6" shop duct system, blast gate, 6" flex pipe and a reducer to the 734's 4" dust port.)
I did have problems with a little snipe when attempting to take more than 1/32 inch in a pass--I may be able to adjust this out of the planer, but I often make two passes anyway: one to thickness and one to surface.
I was surprised to have several small nicks in the blades after planing perhaps 8-10 bf of scrap (carefully inspected/cleaned beforehand), probably due to contaminants in/on the boards. In one case a small knot apparently made a nick. This was disappointing as the planer only comes with 1 set of knives and a new set is fairly expensive. Two passes at the same thickness setting makes the nick traces all but vanish, but this means passing the wood thru the planer 3 times to avoid snipe and nick traces. Perhaps the nicks were a result of embedded sand or silica in the particular scraps used, not something that will happen on a regular basis. (Although my Jet jointer didn't take any nicks when I jointed the same scraps.)
It appears to have the same fit and finish as the more expensive the Delta 2-speed, but the 734 is lighter and more portable. But I'm told the Delta unit is less prone to snipe. I chose the 734 over the 733 because of its disposable knives (I don't have a very trustworthy sharpening service near me) and because of the 3-knife head, which should save me some sanding. If those things aren't important to you, the older 733 might be a better value, while supplies last.
Based on my short experience, I'd recommend the 734. I withheld 1 star because of the snipe and nick problems.
Click Here to see more reviews about:
DEWALT DW734 15 Amp 12-1/2-Inch Benchtop PlanerThe DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm. Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock.
Powerful 15 Amp Motor for Deep, Clean CutsBenchtop planers are a long-term investment that allow you to buy rough stock and dimension it yourself. They also make creating custom materials easier, which, makes getting great results easier.
This planer's powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch.
Reversible, Disposable Knives for ConvenienceThe DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.
For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.
Effective Dust and Debris ManagementThe DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris.
Large Capacity and Easy, Accurate Depth AdjustmentThis planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.
In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.
This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.
This DW734 12-1/2-Inch Thickness Planer with Three Knife Cutterhead comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.
What's in the BoxDW734 DEWALT 12-1/2-Inch Thickness Planer with Three-Knife Cutterhead and dust hood.
Get 49% OFF
Click here for more information about DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer
