Broan Parts

Showing posts with label planers. Show all posts

DELTA 22-540 12-Inch Portable Planer Review

Average Reviews:

(More customer reviews)I have owned the 22-540 for five years. When I purchased the machine, I was attracted by the low price and the fact that there were few alternatives on the market at that time, unless you wanted to purchase a 15 inch stationary planer. This model represented Delta's original foray into the market and this model has needed modifications in its design. The fact that it has dropped about $150 in price over the last five years is indicative of how overpriced it originally was and how it currently compares to the competition. My complaints about this machine: 1. Poor infeed and outfeed support result in serious sniping 2.There is no lock on the thickness adjustment and if you plane multiple boards, the cutter head backs off and the thickness will vary between the first and last boards you plane on the same setting. 3. It is somewhat difficult to replace the spring-mounted blades and you need to purchase a set of magnetic blade holders in order to get both blades set at the same height on either end. 4. The blades dull very quickly and it would be preferable to have an option of carbide blades because of the amount of time required to change the blades. 5. The machine really labors when planing wider boards and has a tendency to run the boards through at an angle rather than parallel to the sides of the planer. There are much better models which are available today and unless you plan to do a very limited amount of planing, you would be better off to spend a little more money and purchase a better piece of equipment.

Click Here to see more reviews about: DELTA 22-540 12-Inch Portable Planer

Sold as one unit. (1 unit = each.) 15 amps, 120V. 8,000 RPM/16,000 CPM. 12-1/8" x 26" table w/ extensions. Patented cutter head adjustment system raises and lowers on four large, precision ground columns. Easy to read English/metric scale for making fast depth of cut settings. Board thickness: 6" max, 3/16" min. Width: 12-1/2". Depth of cut: 3/16" max. Length of stock: 12" min. Feed rate: 26.2 ft/min. 2 double edged reversible, quick change knives. Adjustable infeed/outfeed tables and low friction, stainless steel base provide a large smooth surface for moving stock through planer. Stock roller allows for stock to be passed over the planer. Replacement blade SKU #2053049. UL listed. Boxed. Manufacturer number: TP305. SKU #: 2005130. Country of origin: China. Distributed by Porter-Cable/Delta.

Click here for more information about DELTA 22-540 12-Inch Portable Planer

Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-Phase Review

Average Reviews:

(More customer reviews)The machine is absolutely heavy duty. Although, there are a few things that I have found issue with:
1) machine doesn't work well with wide poplar boards. I have a heavy duty dust collection system connected to it but the poplar creates long strands from the wide boards. These strands clog up the exhaust chute causing the shavings to back up onto the outfeed roller and stop the boards from continuing through the planer part way through a feed. Basically have to lower the table and pull the board out to clean the strands out. This binding of the strands has tore up the outfeed urethance rollers to the point of no return. ***update: I was able to take the rollers off the machine and turn the urethane down on an engine lathe to straighten the urethane after much use. (note: high rpm, low feed rate and a touch with sand paper when finished) Works better than new now. I should be able to do this a few times before having to buy new ones. By the way, the new rollers are pretty cheap to replace.***
2) Wish the table length was longer or adaptable to adding an extension. Would be nice.
The machine is very easy to work with and work on. The molding feature is great and works well. I've done all the trim in my new house with this machine. Hope to have a long future with it in my business.

Click Here to see more reviews about: Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-Phase

The Powermatic PM15 Planer/Molder is a true workhorse that handles a wide array of jobs quickly, easily, and with precision. Using single or three-piece molding knives, this tool gives you wide selection of profiles. The perfect choice for the professional woodworker or serious hobbyist, the PM15 also features two feed speeds, adjustable depth of cut, and a hinged top with four-inch dust port.
Gets the Job Done Quickly and EasilyEquipped with a five-horsepower motor that spins the cutterhead at 4,500 RPM, the PM15 can power through the hardest materials with ease.
Great for heavy-duty projects, this machine also has a 15-inch planing capacity--enough to run double molding knife sets--and a cutting speed of 13,500 cuts per minute.
Adjustable Features for Versatility and PrecisionTo give you maximum versatility and precision, the PM15 offers two feed speeds: 10 and 20 FPM. The lower speed is perfect for projects that require maximum stock removal, the higher speed is ideal for achieving fine milled finishes on decorative moldings.
What's more, the PM15's table height can be adjusted with a chain and sprocket for precise depths of cut. An easy-to-read depth-of-cut scale has a large hand wheel for quick setups, and the hinged top ensures effortless tooling changes.
Durably Designed with a Convenient Dust PortThe PM15's table is made of cast iron with polished, precision-ground surfaces for durability and easy feeds. Four lead screws support the table, and a full cast-iron head assembly supports the feed rollers and cutter head.
For convenience, an integrated dust port hooks up to your dust collection system for improved visibility and a healthier, more pleasant work environment.
Dimensions and Warranty InformationThe PM15 measures approximately 34.0 x 51.0 x 28.0 inches (WxHxD), weighs 423 pounds, and is backed by a five-year warranty.
What's in the BoxPlaner/Molder; one handwheel; one knife-setting gauge; one dust chute with fasteners; one manual; and one warranty card.

Get 22% OFF

Click here for more information about Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-Phase

Hitachi P12RA 12-9/32-Inch Planer and 6-1/8-Inch Jointer Review

Average Reviews:

(More customer reviews)This machine is pure joy. I bought one to replace my Delta which was an O.K. tool. It doesn't hold a candle to this beauty though. No portable even comes close. In fact , most stationary units wish they could perform this nicely. I've never used a planer or a jointer that produces smoother finishes than this machine. Usually in a combo unit you lose to compromises. Not so here . It has plenty of power to do anything you want to. It runs quieter than some of the other portables I've used. The one piece table is something others should copy in their designs.Since the cutter head is stationary ,it doesn't need a lock. Snipe is almost nonexistent. It makes for some of the smoothest surfaces I have ever produced. Even highly figured hardwoods are no problem if you keep your blades sharp.The height adjustment is the smoothest on the market. Many high end woodworking tools come from Japan and this is no exception. If you are willing to pay the little bit more that this tool commands you will be rewarded by years of precision cutting you won't find anywhere else.

Click Here to see more reviews about: Hitachi P12RA 12-9/32-Inch Planer and 6-1/8-Inch Jointer

Click here for more information about Hitachi P12RA 12-9/32-Inch Planer and 6-1/8-Inch Jointer

JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase Review

Average Reviews:

(More customer reviews)I have the open stand version of this planer. I have had one of these for about 3 years now and it has proven to be extremely dependable. I was using a Delta portable/benchtop planer before I got the Jet. I wanted a more powerful planer but it had to be light enough for me to move it around without help. This Jet planer was the perfect choice. It is easy to roll around in my shop and it is just tall enough that if I need to take it somewhere, I can just tilt it over and slide it right in the back of my truck. I am a hobyist not a pro so I don't use it every day but considering how well it is built and how quiet it runs, I don't think it would have any trouble in daily use. I would guess I have planed between 500 and 1000 board feet of oak, cherry, pine, cedar, poplar, and others. Generaly taking 15/16" lumber down to 3/4" sometimes down to 1/2". Also made a few hundred linear feet of trim for a friends house. The original knives are still in it, running fine. The molding knives for the Sears molder/planer will fit in this planer. If you need portability but want more power than the benchtop units, this is the tool to get. Being able to make molding is just kind of a nice fringe benifit for me, I would have gotten it even if it didn't do molding.

Click Here to see more reviews about: JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase

Get 27% OFF

Click here for more information about JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase

DELTA 22-790X X Series 15-Inch Planer Review

Average Reviews:

(More customer reviews)I replaced my Makita bench top planner with this Delta 15" to handle my growing thirst to build larger furniture from bigger rough cut lumber. The Makita did a fine job for 6 years but it had it limits when it came to working a pile of figured hardwood
I had several criteria for choosing a new planer;
Reputable manufacture & warranty
15" minimum width capacity
2 Speed feed rate
Highly mobile and small enough to fit into my shop
Tall enough outfeed to put long boards over the top of my table saw
Byrd Shelix indexable carbide spiral cutterhead or convertible to Shelix in future
The Powermatic 15HH15 $2500 and Grizzly G1021X2 $1500 + shipping + mobile base, met most of my needs. However, both have rigid mounted infeed and outfeeds which would take up a lot of room in my shop all the time. The Powermatic has a built-in base that doesn't work well in dust or on an uneven floor and it could not be easily raised to put the outfeed over my tablesaw. The Grizzly planer was economical but the one year warranty and the lack of a dealer network bothered me. Space requirements became the deal breaker with these two.I got the Delta 22-790X with the mobile base for $1400. It has a 5 year warranty, a great dealer/service network. The infeed/outfeed tables pivot down and I can easily move this planer around my shop.
It took some work to set it up by myself. I used mineral sprites to clean off the rust proofing. The posts must be very clean and lightly oiled, or the lifting crank will work hard. I tipped the head onto some of the Styrofoam packing and attached the base. Tipping it upright wasn't too hard, but I think am a fairly strong guy. To set it on the mobile base I cranked up the head, put three 2x4's 8' long through the planer, rested one end of the 2x4's on my work bench, and the other on a sawhorse. Then I cranked down the head which lifts the planer, slide the base under and lower the planer on to the mobile base. I won't recommend this proceed for everyone, it's safer to follow the Delta directions and get some help.I love the drop-down infeed and outfeed tables. This planer doesn't take up anymore space than the old Makita on a stand. I added a 7" high box between the planer and mobile base to help long boards clear my tablesaw. The two speed feed really makes short work of planning a pile of lumber. At the slower feed rate it leaves a good finish ready for minimal sanding. I must remember to lock down the head at both post clamps or suffer significant snipe.
Tipping the motor to access/change the knives is relatively easy, but I do plan on buying a Byrd Shelix indexable carbide spiral cutterhead someday to make my life easier. Even with the $800 added for cutterhead, the Delta is $300 less than the Powermatic and takes up considerably less room. I am very pleased with the Delta 22-790X.
UPDATE:
I recently added the Byrd Shellex cutter for less than $600. It is an incredable upgrade. On low speed the finish is like glass and on high speed it looks as good as the standard head cut on low speed. An added benifit is that the chips are fine/small, and don't plug the dust collection.
It was not the easiest to change over, but the Byrd provided instructions are good. Make sure that you use new bearings, gasket, gasket sealant, and shaft seal. The bearing might come with the Byrd cutter now, and you can get the shaft seal and gasket from Delta online/phone. Assembly drawings are also available online. Using Permatex helps hold the gasket in place. Mine came folded and the Permatex FORM.A.GASKET sealant was a must because it leaked without it. I also replaced the lube with Mobil sythetic gear lubricant 75W-90 because I use this planer a lot and plan on keeping it for a longtime

Click Here to see more reviews about: DELTA 22-790X X Series 15-Inch Planer

Fast, powerful, and efficient, the Delta 22-790X 15-Inch Planer with Deluxe Stand features rugged construction, a robust motor, and time-saving features that let you make clean, accurate cuts quickly and easily. Ideal for any woodworking shop, this planer offers smooth performance, a three-knife cutter head for cutting precision, and heavy-duty cast-iron table with adjustable bed rollers for durability and accuracy.
Powerful Motor, Fast Feed Rates, and Time-Saving Motor-on-Top DesignPowered by a 3-horsepower, 240-volt, 1-phase, 60-hertz motor, the DELTA 22-790X 15-Inch Planer easily works through rough lumber. Its fast, dual-feed rates (16 fpm/30 fpm) let you power through jobs, while its motor-on-top design saves you time by eliminating the need to move in-feed and out-feed rollers every time you make a cut. In addition, Delta's exclusive serrated in-feed roller, three-knife cutter head, and deluxe roller stand make light work of even the biggest jobs.
Efficient Power Distribution and Smooth Stock FeedingFor powerful and responsive operation, the oil-bath gear box takes power for the feed rollers directly from the cutter head, while the spiral, serrated-steel in-feed roller and polyurethane out-feed roller keep stock moving smoothly and efficiently.
Precise, Accurate, and Easy-to-AdjustFor precision and accuracy, the 22-790X's cutter head assembly features a patented adjustment system that raises and lowers cutter head on four precision-ground columns.
Rugged Construction with Cast-Iron Table and Dust ChutesAs durable as it is powerful, the22-790X features a rugged chain-and-sprocket drive that provides positive feeding and long running life. Dust and debris are kept away from the planer via 4-inch and 5-inch dust chutes for extended durability. And the 15- x 62-1/2-inch table is made of sturdy cast iron for protection against wear and tear.
Dimensions and Warranty InformationThe DELTA 22-790X 15-Inch Planer with Deluxe Stand measures 28 by 26.5 by 20.5 inches (W x H x D), weighs 340 pounds, and is backed by a five-year warranty.
What's in the Box15-Inch Planer, three-knife cutter head, serrated in-feed roller, polyurethane out-feed roller, anti-kickback fingers, cast-iron table with adjustable bed rollers, knife-setting gauge, 4- and 5-inch dust chute, deluxe stand, and manual.

Get 39% OFF

Click here for more information about DELTA 22-790X X Series 15-Inch Planer

JET JJP-12 12-Inch Jointer Planer Review

Average Reviews:

(More customer reviews)I struggled a bit to decide whether to rate this 4 or 5 stars, but in the end decided on 5 based on value for the money.
The machine is quite well-made. Plenty of power, smooth operation, generally good fit and finish. It produces good results. One thing I particularly appreciate in this machine is that the dust collection hood is shallow enough that you don't have to crank the planer table too far down when switching over to jointer mode. I like the single handle table lift. Table adjustment is smooth and easy. The dust collection works very well.
I don't like a few things. First, I dislike the Euro-style guard, but that's just preference. Second, the grind on the tables is unusual - sort of a cross-hatched ripple. It actually works very well and eliminates the suction drag you get on some jointers and planers with polished tables. It was a pain in the neck to clean when the machine arrived, though! Last, and most seriously, the fence is minimal and hard to adjust. Its support is sheet metal and the fence is a medium-weight extrusion. The support uses multiple locking knobs, and the fence itself is easy to twist. You need to check the angle (or for square) at several points after adjusting it. How serious this is depends on your use. As I only use the fence at 90 degrees, it was acceptable as it is solid and stable once set.
The footprint of this machine is new for Jet, and there isn't a mobile base listed specifically for it in the market for it as of this writing.
This is a lot of machine for the money - even at list price. Its closest competition is Grizzly's G0633, which is comparably-priced when you factor in shipping. As I was able to buy the Jet on sale and with no shipping charges at considerably less than the Grizzly, the decision was easy. I would buy it again. Is it a Mini-Max, Felder, or even a Laguna or Rojek? No, but it's not priced like them either, which gets it 5 stars. If Jet were to incorporate a better fence, it would get the 5 stars without the qualifier comments.
UPDATE - In response to another reviewer regarding lack of planer table adjustments: READ YOUR MANUAL! The table is EASILY adjusted using the 4 setscrews provided for the purpose in the column support.

Click Here to see more reviews about: JET JJP-12 12-Inch Jointer Planer

Combining a jointer and a planer into one machine, the Jet JJP-12 12-Inch Jointer Planer is a powerful, space-saving tool ideal for creating an even surface and thickness on your work piece. Custom built for smooth transition between functions, it ensures precise cuts with features including three high-quality knives, an adjustable outfeed table for supporting long work pieces, and large, ergonomic knobs for extra-fine adjustment control.
The switch from jointer to planer is quick, easy, and tool-free.Versatile Combination Saves Space and TimeAny woodworker, whether building a backyard deck or a commercial structure, will appreciate the Jet JJP-12's all-in-one, precision-cut capability. This machine makes a no-tool switch from jointer to planer in just a few quick motions, allowing you the capabilities of both machines without compromising your work space.
Both functions offer a full 12-inch width capacity and 55-inch tables, so no extra ripping process is needed when you switch between modes. And, in addition to its compact bench-top design, a rugged steel stand is included for those times floor positioning is more convenient.
Easy-Handling Adjustments for Maximum AccuracyThe Jet JJP-12's oversized handwheel and knobs fit comfortably in your hand, allowing for extremely fine-tuned adjustments. The wide-spaced handles make it easy to stabilize stock to the heavy-duty, 43-by-6-inch fence. Particularly handy for complex projects, the fence stays in place between function changes and sets easily for bevel cuts up to 45 degrees.
Expert Materials Offer Enhanced OperationThe Jet JJP-12 runs on a heavy-duty 13 Amp motor, supplying the power you need for a variety of cutting applications. Its table top is precision-flattened to ensure a smooth, even cut. The tough, cast-iron infeed and outfeed tables adjust individually to give the work piece superior support. Cutting is performed with three top-quality knives, which are fitted to the high-speed steel cutter head.
The JJP-12 also includes a premium dust collection shroud, which rotates in both settings and has a standard four-inch outlet port, allowing for efficient dust collection that cuts your clean-up time to a minimum.
Top-Notch Features for Safe, Consistent WoodworkingDuring jointer operation, the bridge-style cutter guard's base-located adjustment knob allows wood to pass evenly beneath the guard, preventing you from pushing down directly over the cutter. The planer function's cutter head prevents kickback with gravity-operated fingers, while its metal infeed roller and rubber-coated outfeed roller maintain a consistent non-marring feed rate.
For both operation modes, security is a no-brainer, thanks to the self-engaging locks that fall into place when you make the switch between functions. For your additional safety, the magnetic on/off switch has a built-in limiter to prevent start-up after power outages and while you switch between modes.
The JJP-12 is backed by a five year warranty.
About JET: A History of Sharing New, Feature-Rich ProductsOpened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.
What's in the BoxJet JJP-12 12-Inch Jointer Planer

Get 19% OFF

Click here for more information about JET JJP-12 12-Inch Jointer Planer

Factory-Reconditioned Ryobi ZRAP1301 15 Amp 13-in Surface Planer with RapidSet Blade System Review

Average Reviews:

(More customer reviews)I needed a planer and money was a factor. Home Depot had this one for $200, a Rigid for $350, and 2 DeWalts, 1 for $350(?) another for $550. Normally I buy DeWalt tools but money was tight and I don't need a planer for everyday use so I took a shot and bought the cheapest one available. It has worked well. One thing I used it for was to plane down some old stair treads. These are hallway stairs in a two family and I didn't want to buy $1000 worth of oak treads, at $25 each for laminated junk, and good ones would be much more, though you would have a hard time finding them because HD/Lowes only carry junk. The treads were 11 1/2" wide by 40" long and the planer went right through them. With wood that wide you are only supposed to take off 1/16th each pass so as not to overwork the machine and thats what I did. On long boards it is best to support them on both sides of the machine (in/out feed)because the weight will push the board up into the blades at the beginning and end. I suppose thats true with all planers.It gave a nice finish on the wood until I damaged the blades because I missed removing a nail or two on the older wood. Replacement blades were surprisingly inexpensive and easy to install. One thing I liked was the depth adjustment wheel. Each full revolution equals a 16th of an inch, so it's easy to keep track of how much you are planing. There is a gauge, but I have bad eyes, so I kept track using the wheel and measuring the wood with a tape measure when I started to get close. If I had to do it again, I'd still buy it. If I used one daily, I guess I'd go with the DeWalt, but $200 versus $550 was a little too much extra.
PS. I am not affiliated with any of the companies in this review. Often I think reviews are written by company people to fool you into thinking their product is the best one ever created, but this is an honest review.

Click Here to see more reviews about: Factory-Reconditioned Ryobi ZRAP1301 15 Amp 13-in Surface Planer with RapidSet Blade System

This is a factory reconditioned power planer. Reconditioned generally means that the power planer has been returned to the manufacturer, who brings the power planer back to like new condition. Some power planers may contain cosmetic blemishes. Includes 15 Amp 13-in Surface Planer with RapidSet Blade System - ZRAP1301, Depth Adjustment Handle With Screw, Switch Key, Hex Key, Magnetic Blade Wrench, Open-End Wrench

Click here for more information about Factory-Reconditioned Ryobi ZRAP1301 15 Amp 13-in Surface Planer with RapidSet Blade System

Makita 1806B 10.9 Amp 6-3/4-Inch Planer Review

Average Reviews:

(More customer reviews)This was expensive, but it really does the job. It was a lot bigger than I imagined, and is heavy too, but is easy to control and the depth adjustment is very presice. I use it to plane down wide table tops, made of boards that is glued together. It works great. The trick is to take very small bites with each cut. Then you can just move the planer back and forth leaving it rest on the wood. If you try to lift it up after each cut you'll wear out your arms. I go cross-grain first to take out the warp and width differences, then with the grain for the final finish. The results are very good -- hardly any sanding is needed. I ordered an additional set of blades for $31 from a local dealer since they weren't availalbe from Amazon.

Click Here to see more reviews about: Makita 1806B 10.9 Amp 6-3/4-Inch Planer

The Makita 6-3/4-Inch Planer, model 1806B, delivers power, cutting capacity and ease of use. It is ideal for professional construction framing, window and door installation, and fine woodworking.

10.9 AMP PowerThe 1806B features a 10.9 AMP motor, with a two-blade cutter head and 15,000 RPM for increased stock removal. The 1806B is equipped with high-speed steel planer blades for added performance, and can plane up to 6-3/4 inches wide and 1/16-inch deep in a single pass. The 1806B is engineered with a precision machined aluminum base for planning accuracy. The 1806B features a comfortable handle and easy depth settings, and the front and back grips are perfectly aligned for improved comfort. The large, study sole plate is engineered for added stability, with a lock-on button for continuous operation.
Engineered for Framing and WoodworkingThe 1806B is engineered for professional construction framing, window and door installation, and fine woodworking. The 1806B is just another example of Makita's commitment to innovative technology and best-in-class engineering.
About Makita's Power ToolsMakita delivers precision, accuracy, capacity, and innovation to woodworkers. Makita has full range of miter saws, jig saws, circular saws, routers, planers, sanders, nailers and staplers, blades, compact cordless drills and impacts, and more. Makita's woodworking solutions are engineered for pro contractors, for use in high production settings and in home shops.
About MakitaMakita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.
WarrantyEvery Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.
What's in the BoxMakita 1806B 6-3/4-Inch Planer, sharpening holder assembly, wrench, guide rule, triangular rule, blade set and wooden tool case.

Get 41% OFF

Click here for more information about Makita 1806B 10.9 Amp 6-3/4-Inch Planer

Ridgid R4330 Planer, 13-Inch Thickness Review

Average Reviews:

(More customer reviews)Planes boards to a perfectly smooth (nearly mirror) finish. Width of finished board is (as far as I can tell with my precision) dead on. I like the adjustments on the side for repetitive cuts (1/8,1/4, .. etc). The cut depth gague in the front is nice so I accidentally don't try to make it take too much board at once then it can handle. Powerful! This planer seemed to laugh at the 10 inch wide oak boards I sent through it. I cut the boards from a tree with a Alaskan chainsaw portable sawmill. Each board needed numerous passes to get it down to nice smooth usable lumber. The blades lasted quite a long time. Changed blades after 20 boards, 10' long, 10" wide, receiving around 5 (on average) passes per side, I just turned around the blades and continued planing. The double sided blades are nice. I had an old 12" delta and as I used to either have to get the blades re-sharpened or throw them out once the single side had dulled.
As always... love the lifetime warrenty
Cons:
The hex wrench that came with it for changing the blades stripped and was unusable almost immediately. It was stripped before I changed the first blade. I actually find it easier to use a standard hex wrench for the leverage. Just have to be careful....
Dust collection is "ok", but I don't expect perfection from my 5.5hp big box store shopvac...

Click Here to see more reviews about: Ridgid R4330 Planer, 13-Inch Thickness

Ridgid R4330 Thickness Planer has a three-blade cutterhead which leaves a smooth, blemish free surface to make final finishing easier. Dual-edge, quick change blades with self-indexing blades are self-aligning and reversible for extended life. Precision Lead-screw system eliminates the need for a cutterhead locking system and provides consistent cut thickness across the full width of the workpiece. Large infeed/outfeed table extensions provides extra workpiece support to help eliminate snipe. On-board blade/Tool storage keeps blades and blade changing tools conveniently stored for quick and easy access. 120 V / 15 amp motor with overload protection maximum power for continuous operation. Depth adjustment handwheel easy-to-reach side-mounted handwheel keeps top of planer free to stage material. Sof-Touch controls improve comfort and grip. Ind-I-Cut Depth Gauge instantly measures cutting depth before each pass. Repeat-A-Cut depth stops eight adjustable depth stops to precisely plane multiple workpieces to consistent desired thickness for repetitive tasks. Dust hood rotating panel a simple twist opens the dust hood's rotating panel to allow wood chips to eject from the back of the tool. Use genuine RIDGID replacement blades - Model AC 20501. Specifications: Motor: 120 V, AC only, 15 Amps, No Load Speed: 10,000 r/min. (RPM) 30,000 CPM, Cuts per Inch: 96 CPI, Feed Rate: 26 FPM, Capacity: 13 in. and 6 in., Maximum Depth of Cut: 1/8 in., Weight: 73 lbs. Includes R4330 thickness planer, hex key, magnetic blade tool, blade/tool storage, depth adjustment handwheel and knob, dust hood, dust hood knobs (2), and operator's manual.

Get 39% OFF

Click here for more information about Ridgid R4330 Planer, 13-Inch Thickness

DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer Review

Average Reviews:

(More customer reviews)I was one of the first to get the DW734 from Amazon. Other than the 3-knife head (with 2-sided disposable blades instead of resharpenable) and some styling details, the 734 planer appears to be identical to the previous model, the 733. I haven't been able to get any detailed info on changes between the two models from any source I researched.
It was set up right on the money out of the box except that the cut depth gage is off by around 1/128" (not enough to matter). I was pleased that it came with a dust hood (4"), something not listed in any of the info I was able to get before the purchase.
The cut is silky smooth--unless you look very closely in bright light on a darker wood surface (like walnut) you can't see any blade marks at all.
The machine functions very well--easy to set up, the controls operate very smoothly and precisely, and each of the features works as expected without needless fiddling. The dust hood, even though only 4", clears chips and dust very efficiently. The only time any chips escaped was when I tried to take 1/8" off of a 6" board (a no-no according to the owner manual), and then I got a little puff of shavings out the feed end. (My setup is a Jet DC1100CK 1 1/2 HP dust collector connected via a 6" shop duct system, blast gate, 6" flex pipe and a reducer to the 734's 4" dust port.)
I did have problems with a little snipe when attempting to take more than 1/32 inch in a pass--I may be able to adjust this out of the planer, but I often make two passes anyway: one to thickness and one to surface.
I was surprised to have several small nicks in the blades after planing perhaps 8-10 bf of scrap (carefully inspected/cleaned beforehand), probably due to contaminants in/on the boards. In one case a small knot apparently made a nick. This was disappointing as the planer only comes with 1 set of knives and a new set is fairly expensive. Two passes at the same thickness setting makes the nick traces all but vanish, but this means passing the wood thru the planer 3 times to avoid snipe and nick traces. Perhaps the nicks were a result of embedded sand or silica in the particular scraps used, not something that will happen on a regular basis. (Although my Jet jointer didn't take any nicks when I jointed the same scraps.)
It appears to have the same fit and finish as the more expensive the Delta 2-speed, but the 734 is lighter and more portable. But I'm told the Delta unit is less prone to snipe. I chose the 734 over the 733 because of its disposable knives (I don't have a very trustworthy sharpening service near me) and because of the 3-knife head, which should save me some sanding. If those things aren't important to you, the older 733 might be a better value, while supplies last.
Based on my short experience, I'd recommend the 734. I withheld 1 star because of the snipe and nick problems.

Click Here to see more reviews about: DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer

The DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm. Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock.
Powerful 15 Amp Motor for Deep, Clean CutsBenchtop planers are a long-term investment that allow you to buy rough stock and dimension it yourself. They also make creating custom materials easier, which, makes getting great results easier.
This planer's powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch.
Reversible, Disposable Knives for ConvenienceThe DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.
For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.
Effective Dust and Debris ManagementThe DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris.
Large Capacity and Easy, Accurate Depth AdjustmentThis planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.
In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.
This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.
This DW734 12-1/2-Inch Thickness Planer with Three Knife Cutterhead comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.
What's in the BoxDW734 DEWALT 12-1/2-Inch Thickness Planer with Three-Knife Cutterhead and dust hood.

Get 49% OFF

Click here for more information about DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer

DEWALT DW735 15 Amp 13-Inch Benchtop Planer Review

Average Reviews:

(More customer reviews)This is the first planer I have ever owned or used so I don't have anything for comparison but I like it so far. Out of the box you attach the hand crank and the dust attachment and you are ready to go. There are two dust attachments one to attach a 4" hose and another (diffuser maybe?) for no hose attachment. The directions are pretty well written and easy to follow. All the adjustments and work on the unit can be done with the one included tool that drops into a holder on the top. All the controls work great and are easy to operate.
First let me say again this is the first time I have ever used a planer so a lot (okay, probably all :) of the snipe I got was user error. The more boards I put through the less snipe I got. It took a little playing around with and reading to learn the correct technique for moving stock through so I did get snipe on the first bunch of passes on stock, more frequently on the end of the boards then on the front. Most of what I put through was between 3 and 6 inches wide and 2-5 feet long. I did put a couple wider ones in just to see how it handled it. On a 14in long 11in wide hard maple glue up I took off 1/16th per pass and got no snipe or tearout. Then I put through a 10in wide 4ft long oak board and did get snipe on the end but not the start. I still think it's technique because it didn't do it on every pass and when taking off 1/32 I didn't get it at all. The folding tables aren't out yet, but they will probably help even more. I'm pretty convinced once I get the proper technique down I won't get snipe anymore. I'm getting more and more snipe free boards.
I can't say anything bad about the surfaces. I have had zero tearout and ultra smooth surfaces on everything I have put in no matter what I do. The most I have taken off is an 1/8in while only taking 1/32in on the longer boards. Most of the time I had it set to 1/16in. Probably 50% at 1/16, 30% at 1/8, and 20% at 1/32. I put through a pretty good mix of pine, red oak, hard maple, and ash with most of it being red oak.
The crank turns easily and each turn is 1/16in. The depth stop is easy to set and is for 1/8, 1/4, 1/2, 3/4, 1, and 1 1/4. The removal scale is pretty nice as well, you put the end of the board just under the edge and turn the crank. A little pointer moves on a scale to tell you how much will be taken off. It has a little chart built in showing the max that can taken off based on board width, which is nice for me because I didn't know. The thickness scale is pretty big, easy to read, and easy to set. I only ran it with my dust collector hooked up to the 4" port, but it grabbed everything. After running all the wood through, probably about 4 hours total use, there where 3 little wood chips beside the bed and that's all - the dust collector had the rest. The thing I don't like about it is the dust attachment is right in the center above the outfeed so unless you angle the hose away to the side with an elbow or suspend it somehow it gets in the way of the stock coming out. But so far that is my only gripe. This thing is really loud but I expected that, it's the loudest tool I have. All the scales and settings where dead on right out of the box. I do wish the folding tables came bundled. Overall I'm one happy camper.
Okay, I finally got the folding tables. They are very easy to assemble and align. Each corner of each table can be adjusted for height. The attachment points are spring loaded so they are also easy to take off and put back on. They do help in supporting the work and seem very solid. The front table folds up out of the way and stays there. The rear table however is another story. Because the main table and the back of the moter/blade assembly are pretty much even and the pin to hold the table is set back the rear table will never fold up and stay. When the depth of cut is set around an inch and the cord is wrapped around the cord holder the rear table won't flip up more then around 20 degrees. In my opinion this is a major design flaw, the main table needs to stick out at the rear by at least an inch or two to allow the table to fold up.

Click Here to see more reviews about: DEWALT DW735 15 Amp 13-Inch Benchtop Planer

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.
Powerful 15 Amp Motor for Clean CutsBenchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.
The DW735 13-Inch Planer's powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.
Reversible, Disposable Knives for ConvenienceThe DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.
For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.
Large Capacity and Easy, Accurate Depth AdjustmentThis planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.
In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.
This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.
Fan-Assisted Chip Ejection for Dust ManagementThe DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.
This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.
The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.
What's in the BoxDW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.

Click here for more information about DEWALT DW735 15 Amp 13-Inch Benchtop Planer

Makita 2012NB 12-Inch Planer with Interna-Lok Automated Head Clamp Review

Average Reviews:

(More customer reviews)I am a professional remodeler and in the past five years I have burnt out three Delta planers. Twice, the feed rollers gave up and the last one apparently suffered a major internal failure. I have had the Makita now for two months and it has been flawless as I would expect. We plane some tough stuff like Ipe so we definitely give these things a workout. If it is still flawless in a year, I will give it a fifth star. I appreciate the ergonomics of this well, thought out machine. I am glad that Makita has eliminated a cutterhead lock. I personally couldn't care less about "snipe", of which this machine creates very little. We plane long and then cut to size on the miter saw. Don't you? I do have one question ..., is there any reason why I can't buy replacement blades online?
Okay, so I'm a year late, this is one VERY good planer! It continues to perform like new, with only blade changes. I have it hooked up in my shop and have run hundreds of feet of maple, pine, poplar, Ipe, oak, even plywood and MDF. It just does its thing. Very uneventful, I like that. That's what I pay for. The only downside is that it makes justifying a 15" Powermatic planer difficult!
So here were are now, its 2004 and the little bugger just keeps going! I may never get that new planer. What can I say, after, I don't know, five or six thousand feet of various hardwoods, no changes to date! See you next year!
What can I say? Late again! So here we are almost eight years later and the little SOB just keeps running! New blades, vacuum occasionally, lube the posts if I think of it and it just keeps going. If it ever dies, I'll let you know!

Click Here to see more reviews about: Makita 2012NB 12-Inch Planer with Interna-Lok Automated Head Clamp

The Makita 12-Inch Portable Planer delivers portability and productivity with a compact design, quieter operation, and faster, easier blade changes. The 2012NB features Makita's exclusive Interna-Lok automated head clamp to eliminate snipe for improved planning performance.

15 AMP Power and Quieter OperationThe 2012NB features a 15 AMP motor with a no-load speed of 8,500 RPM and the quietest (83 dB) operation in its class. It has a four-post design and diagonal cross supports for stability, with large table extensions to support the work piece and fully adjustable depth stops for repeat cuts. The 2012NB has a feed rate of 28 feet-per-minute, with an easily-adjusted cutting depth setting for precision planning (maximum thickness: 6-3/32 inches).
Ease-of-Use FeaturesThe 2012NB is compact and lightweight for easy transport to the job site. The 2012NB has faster and easier blade changes, and uses disposable double-edge planer blades. The L.E.D. light indicates that the planer is plugged into the power source, and the large paddle on/off switch is easy to operate. The 2012NB also has a detachable tool box for storage of the standard equipment. An optional dust hood enables a dust collection system to be connected to the planer.
Engineered for Finish WoodworkingThe 2012NB is engineered for finish woodworking, and is ideal for cabinets, closets, staircase, furniture, and more. The 2012NB is just another example of Makita's commitment to innovative technology and best-in-class engineering.
About Makita's Interna-Lok automated head clampThe Makita 12-Inch Portable Planer delivers portability and productivity with a compact design, quieter operation, and faster, easier blade changes. The 2012NB features Makita's exclusive Interna-Lok automated head clamp to eliminate snipe for improved planning performance.
About MakitaMakita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.
WarrantyEvery Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.
What's in the BoxMakita 2012NB 12-Inch Planer, planer blade set, two magnetic holders, wrenches, and tool box.

Get 42% OFF

Click here for more information about Makita 2012NB 12-Inch Planer with Interna-Lok Automated Head Clamp

Recent Posts