Showing posts with label quality. Show all posts
Showing posts with label quality. Show all posts

Louisville Ladder AE4232 225-Pound Duty Rating Aluminum Extension Ladder, 32-Foot Review

Louisville Ladder AE4232 225-Pound Duty Rating Aluminum Extension Ladder, 32-Foot
Average Reviews:

(More customer reviews)
I've had this ladder for about a year and have used it a handful of times. I am very pleased with it because it seems sturdy and well constructed, and I always feel safe on the ladder. It did end up being much longer than I needed because I just guessed, so I would recommend actually figuring out what size ladder you need because this one is kind of hard to maneuver since it is so large. It does slide together in a manageable length for storage though (I have a standard depth garage and it fits fine hanging on ladder racks on the wall). Delivery was easy too!

Click Here to see more reviews about: Louisville Ladder AE4232 225-Pound Duty Rating Aluminum Extension Ladder, 32-Foot

32', Aluminum, Type II Extension Ladder, 225 LB Duty Rating, Quick Latch, Safety Rung Lock, Mar-Resistant End Caps, Swivel Safety Shoes, D-Shaped Rungs, Meets OSHA, CSA, & ANSI Standards, Full Channel Side Rails, Auto-Tilt Pail Shelf.

Buy NowGet 13% OFF

Click here for more information about Louisville Ladder AE4232 225-Pound Duty Rating Aluminum Extension Ladder, 32-Foot

Read More...

Bosch 11230EVS 1-1/2-Inch Electronic Variable-Speed SDS-Max Rotary Hammer with Stop Rotation Review

Bosch 11230EVS 1-1/2-Inch Electronic Variable-Speed SDS-Max Rotary Hammer with Stop Rotation
Average Reviews:

(More customer reviews)
Rotary hammers are a big buck item so its important to consider all of them. I use this Bosch hammer in my electrical contracting business. Its small enough to handle easily and it is built to minimize the vibration that comes with drilling concrete. It can drill through concrete up to is specification and handle ground rod driving too. Buy this unit and the Bosch bits but consider the DeWalt accessories, like ground rod driver or spade bit, because they are usually less money.

Click Here to see more reviews about: Bosch 11230EVS 1-1/2-Inch Electronic Variable-Speed SDS-Max Rotary Hammer with Stop Rotation



Buy Now

Click here for more information about Bosch 11230EVS 1-1/2-Inch Electronic Variable-Speed SDS-Max Rotary Hammer with Stop Rotation

Read More...

Samsung : RFG297AARS 29 cu. ft. French-Door Refrigerator - Real Stainless Review

Samsung : RFG297AARS 29 cu. ft. French-Door Refrigerator - Real Stainless
Average Reviews:

(More customer reviews)
I think this is the best designed refridgerator available as far as space and convenience goes.
First, it has the largest capacity, at 29 cubic feet. It is the same exterior size as a 26 cubic feet unit, but has tighter packed insulation so there is more area inside. The shelving is efficient and flexible. There is a lot of storage in the door.
I think the design is much better than the LG refridgerator. LG has the icemaker in the door, so there is hardly any door storage. The layout of the shelves isn't as good either.
Second, all the interior components are well made. The drawers are solid and roll out it easy. In the GE and Westinghouse refridgerators, the drawers are cheap and hard to slide in and out. (Samsung used to make the GE and Westinghouse refridgerators, but might not anymore).
Third, the icemaker and cold water dispenser is at an angle. It takes up less door space, so there is less room lost inside, and it made so that any size pitcher can be filled.
The downsides:
1. The icemaker has a small capacity and is slow to refill. But, it has been good enough for us.
2. It is a little noisy sometimes and sometimes makes a high pitched whine.
French door refridgerators are all the rage now. They have been around since the 1950s, but never caught on until now. The leaders were the two Korean companies, LG (which used to be Lucky and Goldstar) and Samsung. These two companies made most of the french door refridgerators for all different brands.
If you don't need the indoor ice dispenser, some have an icemaker down in the freezer compartment. This opens up even more room in the refridgerator section.
UPDATE: I FORGOT THE MOST IMPORTANT FEATURE:
The cheese drawer on this slides underneath the door shelves. That means, you do not have to open the doors all the way to slide out the cheese drawer. I cannot swing both doors fully open. On most refridgerators, that means the cheese/meat drawer hits the door shelves and you can only open it a little bit. With the Samsung, you can just open the doors 90 degrees and still get full access to the drawer.

Click Here to see more reviews about: Samsung : RFG297AARS 29 cu. ft. French-Door Refrigerator - Real Stainless

This French Door Samsung refrigerator features Twin Cooling Plus, Power Freeze, Cool Select Pantry, LED Lighting, Ext W/I, E-Star. Real Stainless Surface, 29 cu ft. The Samsung refrigerator measures 35 5/8 inchD x 35 3/4 footW x 70 inchH.

Buy Now

Click here for more information about Samsung : RFG297AARS 29 cu. ft. French-Door Refrigerator - Real Stainless

Read More...

Danze D307740RB Fairmont Two Handle Roman Tub Faucet with Soft Touch Personal Shower, Oil Rubbed Bronze Review

Danze D307740RB Fairmont Two Handle Roman Tub Faucet with Soft Touch Personal Shower, Oil Rubbed Bronze
Average Reviews:

(More customer reviews)
Very nice faucet and a great price! This same faucet sells for over 3 times the amount anywhere else I could find it. A small scratch on the surface with this faucet, but not noticable without inspecting it thoroughly and definately worth it for the price.
Amazon is excellent at fast shipping and returns and replacements. Very fast transactions!!!

Click Here to see more reviews about: Danze D307740RB Fairmont Two Handle Roman Tub Faucet with Soft Touch Personal Shower, Oil Rubbed Bronze

Danze D307740RB Fairmont™ Roman Tub Faucet with Soft Touch Personal Shower, Oil Rub BronzeAlthough a relatively new name, Danze is a brand of one of the world's largest manufacturers of brass faucets and accessories, Globe Union Industrial Corporation. Danze invites you to examine their products carefully to appreciate the high levels of craftsmanship that are revealed by the fit, finish and design of the products. They take great pride in their products, and know they will give you years of beauty and trouble-free service.Danze D307740RB Fairmont™ Roman Tub Faucet with Soft Touch Personal Shower, Oil Rub Bronze Features:; 2 handle with solid brass spout; Spout plug for pressure testing & plaster guard; Installs in decks up to 3" thickness; 4 hole tubs with 6"- 12" centers

Buy NowGet 35% OFF

Click here for more information about Danze D307740RB Fairmont Two Handle Roman Tub Faucet with Soft Touch Personal Shower, Oil Rubbed Bronze

Read More...

Milwaukee 6230N Deep Cut Band Saw Review

Milwaukee 6230N Deep Cut Band Saw
Average Reviews:

(More customer reviews)
I bought this saw because I mistakenly thought that the tool was made in the US. It's not. It's not even made in Taiwan. It's made in China. I hate using tools made overseas and think it is vital, as a tool user, to support my neighbors and my economy by buying american made products. I care much more that my neighbors have work than I care about whether some CEO and his gophers make their bonuses. Quite frankly, I'm saddened and disgusted. I can't speak to quality yet--my US made Milwaukee tools lasted indefinitely. It remains to be seen whether Milwaukee, in this move to cut USA labor costs, can keep up quality. If Milwaukee has followed in Dewalt's footsteps, the answer will be no, and I've just wasted my money on another piece of disposable cr**.

Click Here to see more reviews about: Milwaukee 6230N Deep Cut Band Saw

Portable Band - Saws & AccessoriesCapacity (Round): 4-3/4Rectangular Capacity: 4-3/4 x 4-3/4Number of Speeds: VariableMinumum Speed: 0Maximum Speed: 420Voltage: 120 AC

Buy NowGet 50% OFF

Click here for more information about Milwaukee 6230N Deep Cut Band Saw

Read More...

Makita HM0810B 11-Pound Demolition Hammer Review

Makita HM0810B 11-Pound Demolition Hammer
Average Reviews:

(More customer reviews)
the HM0810B is the best, lightweight hammer on the market. 2900 blows per minute, with a weight of only 11.7lbs. This is the hammer that should be used for chiseling, chipping and scaling, NOT the HK1810, which should only really be used for removing tile and plaster.

Click Here to see more reviews about: Makita HM0810B 11-Pound Demolition Hammer

This Hammer is compact and lightweight for maximum control and is ideal for light chiseling, scaling and chipping operations. Its soft rubber grip side handle swivels 360 degrees for easier handling. A unique anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue. This demolition hammer can be fitted with spline-style rotary hammers shank bits. Its one-touch retainer action means easy accessory installation and removal. The durable carbon brushes on this tool last for approximately 150 hours. Makita factory greased packed this tool for reduced maintenance. Your purchase includes a No. 4 hex wrench and a sturdy plastic tool case.

Buy NowGet 41% OFF

Click here for more information about Makita HM0810B 11-Pound Demolition Hammer

Read More...

Ridgid R4330 Planer, 13-Inch Thickness Review

Ridgid R4330 Planer, 13-Inch Thickness
Average Reviews:

(More customer reviews)
Planes boards to a perfectly smooth (nearly mirror) finish. Width of finished board is (as far as I can tell with my precision) dead on. I like the adjustments on the side for repetitive cuts (1/8,1/4, .. etc). The cut depth gague in the front is nice so I accidentally don't try to make it take too much board at once then it can handle. Powerful! This planer seemed to laugh at the 10 inch wide oak boards I sent through it. I cut the boards from a tree with a Alaskan chainsaw portable sawmill. Each board needed numerous passes to get it down to nice smooth usable lumber. The blades lasted quite a long time. Changed blades after 20 boards, 10' long, 10" wide, receiving around 5 (on average) passes per side, I just turned around the blades and continued planing. The double sided blades are nice. I had an old 12" delta and as I used to either have to get the blades re-sharpened or throw them out once the single side had dulled.
As always... love the lifetime warrenty
Cons:
The hex wrench that came with it for changing the blades stripped and was unusable almost immediately. It was stripped before I changed the first blade. I actually find it easier to use a standard hex wrench for the leverage. Just have to be careful....
Dust collection is "ok", but I don't expect perfection from my 5.5hp big box store shopvac...

Click Here to see more reviews about: Ridgid R4330 Planer, 13-Inch Thickness

Ridgid R4330 Thickness Planer has a three-blade cutterhead which leaves a smooth, blemish free surface to make final finishing easier. Dual-edge, quick change blades with self-indexing blades are self-aligning and reversible for extended life. Precision Lead-screw system eliminates the need for a cutterhead locking system and provides consistent cut thickness across the full width of the workpiece. Large infeed/outfeed table extensions provides extra workpiece support to help eliminate snipe. On-board blade/Tool storage keeps blades and blade changing tools conveniently stored for quick and easy access. 120 V / 15 amp motor with overload protection maximum power for continuous operation. Depth adjustment handwheel easy-to-reach side-mounted handwheel keeps top of planer free to stage material. Sof-Touch controls improve comfort and grip. Ind-I-Cut Depth Gauge instantly measures cutting depth before each pass. Repeat-A-Cut depth stops eight adjustable depth stops to precisely plane multiple workpieces to consistent desired thickness for repetitive tasks. Dust hood rotating panel a simple twist opens the dust hood's rotating panel to allow wood chips to eject from the back of the tool. Use genuine RIDGID replacement blades - Model AC 20501. Specifications: Motor: 120 V, AC only, 15 Amps, No Load Speed: 10,000 r/min. (RPM) 30,000 CPM, Cuts per Inch: 96 CPI, Feed Rate: 26 FPM, Capacity: 13 in. and 6 in., Maximum Depth of Cut: 1/8 in., Weight: 73 lbs. Includes R4330 thickness planer, hex key, magnetic blade tool, blade/tool storage, depth adjustment handwheel and knob, dust hood, dust hood knobs (2), and operator's manual.

Buy NowGet 39% OFF

Click here for more information about Ridgid R4330 Planer, 13-Inch Thickness

Read More...

Milwaukee 6236 4-3/4-Inch 6 Amp/5 Amp 2-Speed Deep Cut Portable Band Saw Review

Milwaukee 6236 4-3/4-Inch 6 Amp/5 Amp 2-Speed Deep Cut Portable Band Saw
Average Reviews:

(More customer reviews)
I am a residential remodeling contractor, and as such have the need to cut all sorts of materials. In the past, I have relied on the ever present Sawzall (another great tool) for most utility cutting needs. Unfortunately, the one thing that the Sawzall cuts only marginally is metal. While it is possible, the Sawzall leaves a rough, ragged cut, and unless carefully controlled, never a nice straight line. None of this is meant to trash the Sawzall - I couldn't get along without it. However, the Portable Bandsaw adds a dimension to cutting that I never had before.
I have found the Milwaukee Portable Bandsaw to be a highly effective tool that not only cuts much faster than either a Sawzall or a hotsaw, but leaves a much cleaner cut. In use, there is almost no vibration, great ease of control, and with a deep capacity, there is little I can find that this saw can't handle. It also makes for a much safer situation in those instances where I would normally use an abrasive hotsaw - the bandsaw cuts without any sparks, the hotsaw shoots a rooster tail of sparks that will ignite any nearby flammable material. Since most of my work takes place outside a carefully controlled shop environment, no sparks equals greater safety.
The blase is inexpensive and easy to replace. Go get it!

Click Here to see more reviews about: Milwaukee 6236 4-3/4-Inch 6 Amp/5 Amp 2-Speed Deep Cut Portable Band Saw

The Milwaukee 4-3/4-Inch 6 Amp/5 Amp Two-Speed Deep Cut Portable Band Saw offers high torque and a powerful motor to maintain a steady, optimum blade speed. With two speeds -- 250 and 350 sfpm -- this saw cuts up to 3-3/4-inches in rectangular and round stock. The excellent balance, open line of sight and quick blade change system make this band saw easy to work with. Using an all ball and roller bearing construction, and worm gear and chain drive mechanism, this tool is built to last. A self-lubricating system is used for maximum wear resistance and long life; no oiling is needed. This Milwaukee portable band saw features a 5-year limited warranty.What's in the Box The Milwaukee 4-3/4-Inch 6 Amp/5 Amp Two-Speed Deep Cut Portable Band Saw, 14-tooth blade, and product manual.

Buy NowGet 48% OFF

Click here for more information about Milwaukee 6236 4-3/4-Inch 6 Amp/5 Amp 2-Speed Deep Cut Portable Band Saw

Read More...

Hitachi DH38YE 1 1/2-Inch Spline Rotary Hammer Review

Hitachi DH38YE 1 1/2-Inch Spline Rotary Hammer
Average Reviews:

(More customer reviews)
Like most Hitachi tools , this is very well engineered. It stands up to all kinds of abuse. Mine ran for years drilling all sizes of holes in old hard concrete. I also used it for chipping which is hard on roto hammers. They don't have a lot of power for breaking concrete as this is not their intended primary use. So when you do use them for breaking , they have to run a lot longer than a demolition hammer would. It has pretty good power for drilling though. I bought mine used and had it for five years before replacing it recently. I went to SDS max which is currently replacing spline drive in the large rotary hammer market. It is a tighter mechanism which transfers more of the hammering power to the bit , resulting in faster drilling performance. If you have a lot of spline bits , this would be a good tool to buy. If you are starting from scratch , I would recommend the SDS max hammers from Hilti , Bosch or milwaukee

Click Here to see more reviews about: Hitachi DH38YE 1 1/2-Inch Spline Rotary Hammer

Sealed grease system insures minimal maintenance. Auto-stop carbon brushes to protect armature. Dust-proof cover for extended maintenance-free operation. STANDARD EQUIPMENT: Plastic Case (317657), Side Handle (981870), Depth Stopper (971786), 3 Dust Covers (985373), Hex Wrench (944459) and Hammer Grease A 1 oz Tube (981840) SPECIFICATIONS: 8 AMP 18V motor, Impact energy of 5.2 ft./lbs. No-load speed of 380 RPM and 2800 BPM. Capacities: Drill 1-1/2". Core bit 4-1/8".

Buy NowGet 50% OFF

Click here for more information about Hitachi DH38YE 1 1/2-Inch Spline Rotary Hammer

Read More...

WARN 17801 M12000 12000-lb Winch Review

WARN 17801 M12000 12000-lb Winch
Average Reviews:

(More customer reviews)
I use this winch for my full-size Bronco and I have family with the same one on their Bronco. This winch is outstanding both in terms of build quality and brute strength. Don't settle for the 8000-lb model if you have a truck or SUV, get one of these and never look back in regret. You need a lot more pulling power than the weight of your truck once you get stuck, and if you have a 6,000-lb truck and an 8,000-lb winch, you could still be in trouble. When that happens, you'll wish you'd stepped up to the 12,000-lb model for the extra pulling power. Besides that, having extra power and stronger internals means less wear and tear so this winch is going to last you a lot longer than lower rated (8,000-lbs) models.
If you can pony up the extra money and you have the room, definitely opt for one of these. I have never had a problem with mine and I don't know a single person with a full-size or SUV that has regretted buying this winch. They are an awesome, extremely well-built product and can handle the elements and the weather. I love mine and would definitely buy another one if I had another vehicle to put it to use on. Great product, great company and one of the best winches they make.


Click Here to see more reviews about: WARN 17801 M12000 12000-lb Winch

Warn Industries M12000 12000-lb Winch can pull up to 12,000 pounds, perfect for the largest off-road vehicles. The M12000 delivers plenty of power, torque and quick no-load retrieval, up to 30 feet per minute. Plus, with a low-profile design, it will fit where you need it. It is powered by a 4.6 horsepower Series Wound motor and a 3-stage planetary gear train for smooth, efficient operation.

Buy NowGet 35% OFF

Click here for more information about WARN 17801 M12000 12000-lb Winch

Read More...