Average Reviews:
(More customer reviews)Like many starting woodworkers, I really needed a jointer and wanted a planer, but both did not fit into my budget. So I considered buying a jointer and just doing without the planer. Then I saw this product, but buying it without a review was a real gamble. I was really concerned that as a jointer it might not be very precise and that would just be a waste of money (I can hand joint a board fairly precisely - it just takes longer). In the end I decided that it was about the same price as many portable planers, and if it did a decent job planing, I would just use it as such.
The machine arrived promptly and was well packaged. Good thing, as is usually the case, the outer packaging was pretty battered. One caveat, the planer extension table and jointer blade guard are placed loose in the cavity of the planer and bang around some. The red paint on the guard was chipped around the corners a bit.
Set up was about a 1-hour job. These are things to consider:
1. I would recommend two people to get the main unit out of the styrofoam. It weighs about 75lbs. and tends to stick in the packaging.
2. The directions recommend tightening all of the nuts for the stand and then placing the unit on it before running the bolts up into the unit. Don't do this. Flip the unit upside-down onto the styrofoam packing and place the stand on the bottom. That way you can actually see all of the bolt holes and adjust the stand so all of the holes line up.
3. The directions fail to mention the three lock washers that go with the hex cap screws for fastening the planer outfeed extension, but they are in the exploded parts diagram (and come in the hardware bag). I recommend putting in all three screws loosely. Then, starting at one end, align the top of the extension just barely below the outfeed table - tightnen lightly. Then do the other side. My first efforts were to do the center screw first, but then every time you lower one side, the other pops up too high. Lastly, don't tighten thes down until you adjust the set screws that adjust the angle of the outfeed (I stripped one that way - but I always make sure to find at least one excuse to go out to the hardware store :-)
OK now for the bottom line - performance.
As a jointer, I was impressed. I jointed some very rough walnut and it came out smooth, straight and square - but only after about 5 passes. the directions advise taking light cuts (1/16" or less) and as I've only had this for a short time, I haven't tried breaking it yet.
Same deal as a planer or surface jointer: nice, but it is a bit underpowered - take light cuts. After all, if you realy want a powerful tool, and could afford it, you'd buy a stationary 15" planer and an 8" jointer. Not much snipe (any?) with these light cuts and the surface is nice.
Four small con's:
1. The 2" dust connector is just barely too big for my Rigid vac - fixed with some sandpaper.
2. One of the extension table holes had to be drilled out to get the bolt to go through (but all of the tapped holes are spot-on.)
3. The stand is a little flexible. I'm going to bolt a peice of ply onto the lower brackets as a shelf - that ought to help.
4. the jointer fence does not have any adjustment for moving it across the table, so all jointing operations occur at the same side. That will end up wearing the blades uneavenly. I'll probably end up making up some spacers with mdf.
I recommend this product.
Click Here to see more reviews about:
Jet JJP-10BTOS 10-Inch Bench-Top Jointer/PlanerFeaturing a compact benchtop design that makes it ideal for smaller shops or job sites with limited space, the Jet JJP-10BTOS 10-Inch Jointer/ Planer is lightweight and powerful. With innovative features typically found only on big floor models, this handy tool offers a precision-ground tabletop for a smooth, straight cut every time, precision adjustment knobs, a telescoping blade guard, and a large dust port.
A convenient dust port helps keep your workspace clean.Two-in-One Design to Maximize SpaceThe JJP-10BTOS's space-saving design doesn't skimp on efficiency. In fact, because it combines a benchtop jointer and a planer in one unit, you get a two-in-one machine to maximize work space. For added peace of mind, the planing and jointing tables both lock to guarantee precise cutting.
Fast Speeds and Various Cutting Depths for VersatilityWith cutting speeds of up to 18,000 cuts per minute, and a maximum cutting width up to 10 inches, the JJP-10BTOS is versatile enough to tackle woodworking jobs both big and small. It also provides a jointer maximum cut depth of 1/8 inch and planer maximum cut depth up to .08 inch.
For additional versatility, a rigid steel stand allows the unit to easily transition from a benchtop to a standing configuration.
Powerful 13 Amp Motor and Two High-Speed KnivesA heavy duty, 13 Amp motor provides robust performance for a variety of cutting applications, while two high-speed steel knives make precise, smooth cuts.
Sheet Metal Outfeed Table Tackles Long Work PiecesVersatile enough to handle a range of material sizes, the JJP-10BTOS includes a sheet metal outfeed table with height adjustment that supports even long work pieces. Its clever design also reduces snipe for consistent results.
Stable and Accurate Jointing and PlaningWhile you work, the tool's strong, accurate aluminum extruded fence can be angled up to 45 degrees, making jointing stable and accurate. Additionally, the planer includes a scale and pointer that indicate the distance between the planer table and cutter head. Finally, an integrated cord wrap makes for easy portability and prevents accidents or errors caused by dangling plugs and wires.
Oversized Ergonomic KnobsFor safe, secure operation, the JJP-10BTOS gives you easy access to the controls you need while working. In fact, the oversized, ergonomic knobs are extremely user friendly, helping you avoid errors caused by a slippery grip and preventing you from wasting time hunting for hard-to-see buttons or switches. Instead, these easy-to-see, stable knobs provide you with maximum control at every stage in your job.
The JJP-10BTOS is backed by a three-year warranty.
About JET: A History of Sharing New, Feature-Rich ProductsOpened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.
What's in the BoxJet JJP-10BTOS 10-Inch Jointer/ Planer with stand
Get 19% OFF
Click here for more information about Jet JJP-10BTOS 10-Inch Bench-Top Jointer/Planer
