Jet 708124 XLIFT-K: Xacta-Lift Router INS w/ DLX Fence Review

Average Reviews:

(More customer reviews)I have had this lift for several years (it came with my Jet table saw) and as a lift it does a good but not perfect job. This lift is actually made by Jessem (Rout R Lift) and I believe it is the only lift currently available for use with fixed AND plunge routers.
From the Jessem website:
The main insert plate is 11-3/4" x 14-3/4" x 3/16" solid aluminum and anodized for durability. One
revolution of the quick speed knob equals 0.05"
Split Fence with vacuum attachment (this IS NOT A JESSEM FENCE)
Pros: This lift uses a master plate that is pre-drilled for most routers (However, I had to drill new holes for my Hitachi 12v2 3.25 hp) you remove the base plate from your router then screw it into the plate very simple. Note, if you use a plunge router you might want to remove the springs from the routers shaft but it is not required with most routers. The center hole will accept up to a 3 1/2" raised panel bit. Jessem offers replacement ring inserts so you can adjust the opening to the size of the bit. Travel for the lift is excellent at 2 1/2 inches (note: if you have removed the springs from your plunge router you can adjust the depth of the router it self for an additional 2+ inches of travel) The plate is very strong aluminum and has a good leveling system.
Cons: The crank is a belt driven system and as such has some slack when changing direction of travel. The best technique is too go past where you want to be then ease up to the final adjustment. Works well but there are smoother systems out there. The fence is 2 star at best. It has a split face and a vacuum attachment (not sure if vacuum attachment comes with or is an option?) dust collection is pretty good. The biggest problem with the fence is the attachment points. The fence attaches to the plate causing a very limited depth of cut at most you get 2.5 inches of travel from bit to fence. Fine for edge routing in many situations but I have found it to be very frustrating and have replaced it with a Rockler fence that is longer, taller and attaches to the table. The last knock on the lift is the distance from the front of the plate to the opening. It is about 10 inches so by the time you add a miter channel you are 11 inches from the bit. Therefore you can not use after market accessories with the miter slot. All of your feather boards etc will have to be shop made. Not a game breaker but not convenient either. (Tip: mount the plate with the back edge toward the front edge of table and use after market fence now your miter slot will be closer to the bit.)
Overall: Even with its limits I like this lift. By using it with a Hitachi 3.25 router I can turn some very large bits and a cost that is far less then dedicated lift/router motor units (3+ hp routers with removable motors cost well over $300 alone) and I can use the router handheld if needed.

Click Here to see more reviews about: Jet 708124 XLIFT-K: Xacta-Lift Router INS w/ DLX Fence

Includes XLIFT-K XACTA® Lift w/ Deluxe Fence - 708124

Get 35% OFF

Click here for more information about Jet 708124 XLIFT-K: Xacta-Lift Router INS w/ DLX Fence

Read More...

Hansgrohe HG06128860 Swing C Pull-Out Spray Kitchen Faucet, Steel Optik Review

Average Reviews:

(More customer reviews)Wonderful fixture; good quality; stylish; and very easy to install. Also, it is
Excellent working unit; looks great, feels great when handling spray, functions great.
The retroactive look is stunning;

Click Here to see more reviews about: Hansgrohe HG06128860 Swing C Pull-Out Spray Kitchen Faucet, Steel Optik

Retroaktiv Swing Kitchen Faucet - Lever Handle - 06128

Get 30% OFF

Click here for more information about Hansgrohe HG06128860 Swing C Pull-Out Spray Kitchen Faucet, Steel Optik

Read More...

Fahrenheat/Marley FUH54 Suspended Electric Heater Review

Average Reviews:

(More customer reviews)I've had this heater for over 2 years now and have had no problems with it whatsoever. This is very well built product. All the connections are very solid and secure, using heavy duty materials. The heat settings are adjustable via easy to access jumpers. I have it on the factory standard setting and it heats my 20' x 20' garage in less than 10 minutes. Highly endorsed by me.

Click Here to see more reviews about: Fahrenheat/Marley FUH54 Suspended Electric Heater

Ceiling mount bracket allows heater to be used in 4 indexed positions, straight out, straight down, and 2 intermediate positions, or anywhere inbetween. Unit may be allowed to pivot. Ideal for garages or workshop areas. Adjustable louvers. Steel fins are

Click here for more information about Fahrenheat/Marley FUH54 Suspended Electric Heater

Read More...

Vega D-36 36-Inch Professional Lathe Duplicator Review

Average Reviews:

(More customer reviews)I was very happy with the duplication of this machine. However the video and the written instructions that were included were terrible. The video was made in 1990 and it shows an out of date assembly method. I watched the out of focus video and muffled sound for about 5 minutes. The video was no help on how the machine is put together. The written instructions were no better. The print is small and it does not show where to install all the parts that were given. The manufacturer needs at least a full color photo so you can have some kind of idea where things go. That being said I would still recommend this duplicator even though setting it up was time consuming. You can e-mail me at mccormickwoodworking.com if you need any help setting yours up. Andy McCormick

Click Here to see more reviews about: Vega D-36 36-Inch Professional Lathe Duplicator

Get 18% OFF

Click here for more information about Vega D-36 36-Inch Professional Lathe Duplicator

Read More...

Vega D-48 48-Inch Professional Lathe Duplicator Review

Average Reviews:

(More customer reviews)....I find that this is a very nicely engineered tool. It is easyto set up after watching the video, though the written instructionsare poor. Some of the non-essential parts are poorly machined, but this does not effect their performance, just their asthetics. I would recommend this tool for anyone who would like a duplicator regardless of the lathe that you own. With a little help from Vega and Amazon, my duplicator fit my vintage Oliver lathe perfectly.

Click Here to see more reviews about: Vega D-48 48-Inch Professional Lathe Duplicator

Get 23% OFF

Click here for more information about Vega D-48 48-Inch Professional Lathe Duplicator

Read More...

Minka-Aire Fans F502-BCW 42" Gyro Double Belcaro Walnut Ceiling Fan w/ Light, Wall Ctrl & Blades Review

Average Reviews:

(More customer reviews)The Minka-Aire gyro Fan is probably a pretty good product, however, the fan I received was defective. I installed it and while both fans worked electrically, one of the fans was binding internally and would not continue rotating. A call to M-A tech support quickly diagnosed the fan as defective and I was told to return it. I can't say enough good about Del Mar Designs, the Amazon Vendor. Shipment was paid by Del Mar both ways and their "No Hassle" return policy was truly no hassle. Credit was issued promptly.

Click Here to see more reviews about: Minka-Aire Fans F502-BCW 42" Gyro Double Belcaro Walnut Ceiling Fan w/ Light, Wall Ctrl & Blades

The Minka-Aire Fan F502-BCW is a Traditional Gyro Ceiling Fan with the WC212 - Three Fan Speeds, Forward / Reverse & Light Dimmer Wall Mount Control in the Belcaro Walnut motor finish. A magnificent transitional rendition of the original Gyro ceiling fan design. Our traditional finishes transcend the turns of time. This Ceiling Fan is from the Traditional Gyro Collection and is UL Indoor rated. The Traditional Gyro Includes 3.5" & 6" (3/4" Interior Diameter) Pole.

Get 32% OFF

Click here for more information about Minka-Aire Fans F502-BCW 42" Gyro Double Belcaro Walnut Ceiling Fan w/ Light, Wall Ctrl & Blades

Read More...

INCRA LS32-TS TS-LS Table Saw Fence 32-Inch Range Review

Average Reviews:

(More customer reviews)For those of you wondering what the difference is between the Saw Tooth TSIII Table saw fence from Incra and the Lead Screw or LS-32 I will try and explain.
I was originally slated to purchase the SawTooth version or ST TSIII as it is known and then canceled my order after talking with an Incra rep. He told me that both of the fences were equally good , but that the LS had some advantages with positioning and movement. I told him I went with the ST TSIII in the beginning because all the reviews here at Amazon were for it only and it was more expensive than this LS version. I figured it must be better. He laughed and explained that he does not know why Amazon offers the pricing structure they do. Amazon sells the ST TSIII for more than the LS-32. It should be the other way around. The LS-32 is the new and improved model.
He went on to tell me that both are extremely great and function in the same way, however the Lead Screw has moved the micro adjuster right next to the saw fence making it much easier to dial in because you can see what you are doing. He also talked about the saw tooth movement versus the screw based movement. That he said was a personal preference. Both will function the same in the end, but the LS is what is being promoted by INCRA in all their product lines, not the ST TSIII. Out side of that they are essentially the same product and you could not go wrong with either. However, why pay more for the Sawtooth?? Thats just dumb to me.
Onto the REVIEW:
I was tired of double checking every time I wanted to adjust my fence. The LS makes it so easy and so perfect. It glides nicely along the rails and effortlessly locks into place. I have cut a few hundred BF of hard maple at different widths for some cabinet faces and doors and there has been no flex in the fence or deviation what so ever. I measure the cuts every now and them with a micrometer just to check and it is dead on to .003 of an inch every time. WOW!
This fence will encourage you to make precise cuts. I also want to add that before I switched this fence I was cutting the same hard maple. I am using a WWII blade and every now and then I would get burn marks. With this fence it does not happen except occasionally due to springy wood grain only ...not the alignment like the other fence. This was a big deal for me because I was forced to run 2 passes to get the correct size. Not anymore!
I believe another benefit of the fence is that it is much wider/longer than my old fence by about 6 inches so there is extra infeed and outfeed length to help guide the board.
I can not say enough good things about this product. I have recently ordered the miter5000 sled after my good experience and will be reviewing it shortly. The fence did take me about 2 hours to setup because I had to drill holes in my table top, however I have a non standard width of 23 1/2" versus the 27" . Otherwise expect the install to take a good 1 hour to do after you disassemble your original fence.
My cheazy little contractor saw equiped with the INCRA LS-32, the Miter5000 and a WoodWorkerII blade performs flawlessly. I do not think I could get a better cut on a unisaw.Cons: Only one, and only if you have space issues
When you are cutting a board of 24" or wider you will need 5-6 feet to the right of your blade. it does leave a good size footprint in the shop.


Click Here to see more reviews about: INCRA LS32-TS TS-LS Table Saw Fence 32-Inch Range


The new INCRA LS32-TS offers the one thing that every table saw fence should have that none does - namely, Automatic Positioning Control. All other table saws doepend on a tape measure and your eyesight to position your work. That\'s why all table saw users are resigned to the fact that a good cut requires long set-up times and endless trial and error. The INCRA TS-LS completely eliminates the need for these tedious processes by using INCRA\'S patented lead screw technology to position your work instantly and automatically to within 0.002".Even better, if you want to repeat a cut, you can return to any former position in less than 5 seconds with ZERO repeatability error. This kind of accuracy and perfect repeatability are luxuries that woodworkers could only dream about before the INCRA TS-LS. And because of its structural design, centrally placed carriage, and optimized side mounted clamping system, the entire unit virtually welds itself together into one solid block of steel and aluminum when locked in place. The result is exceptional strength, rigidity and stability.

Get 14% OFF

Click here for more information about INCRA LS32-TS TS-LS Table Saw Fence 32-Inch Range

Read More...

Powerwinch P77702 215 12 Volt Trailer Winch Review

Average Reviews:

(More customer reviews)This product does not come any where near its advertised expectations. Even though it has a rated capacity of 1500 lbs., the actual rating must be closer to a few hundred pounds.
My old Powerwinch model 212(rated at 1000 lbs.) had finally worn out after many years of good service. Actually, the only thing wrong with it was that the clutch plates needed to be replaced, but unfortunately these parts were no longer available according to the manufacturer.
So I purchased the ST 215 winch as a replacement to help load my 15 foot fiberglass boat onto a trailer that has a bed of all rollers. I liked the idea of not having cable that becomes 'prickly' after years of use and felt that the additional 500 lbs of capacity would bring my boat onto the trailer easier.
The first time I used the ST 215 it was only able to bring the boat to within 3 or 4 feet of the front of the trailer before it stopped. No matter how tight the clutch was tightened the winch would not bring the boat in all the way. After several phone calls to the retailer and manufacturer it was decided to return it back to the manufacturer for repair. With a 4 week turn around I received the same winch back, but this time it did not work at all. After another call to Powerwinch I was told that maybe the small drive gear at the end of the motor shaft has come off during shipping. Fortunately I was able to fix this problem myself with locktite. Unfortunately, when used again back at the boat landing the winch still was not able to retrieve my boat all the way up the trailer. I returned the ST 215 again and this time after another 4 weeks turnaround time, I received a new winch. Again the same thing - the winch would not retrieve the boat all the way up the trailer. The winch was returned and another 4 weeks passed. This time the winch was not slipping as it had in the past and appeared to be able to load my boat. However, about a foot before the boat was all the way up on the trailer, the ST 215 exploded internally and the boat went flying down the trailer back into the water. Have you ever tried loading a boat without a winch? Backing the trailer until it was completely submerged worked - not a recommended method. Later on I opened up the case on the winch and found that one of the main shafts had sheared completely off right at the final drive gear. Obviously, this ST215 could not handle my little 15 foot fiberglass boat. My patience had worn out with this product. Not only had I to deal with the hassles of multiple returns and remounting this winch, but I lost many precious months of boat use. Powerwinch refused to refund my money and would only offer a product of lesser value in exchange, but fortunately the retailer made good on this product.
In my experience the ST 215 winch is not anywhere near capable of reaching its 1500 lb rating. My old model 212(Made in America) rated at 1000 lbs had no problem handling my boat for about 20 years. I think the ST 215 would work for a small aluminum jon boat or something of that nature, but definitely not anything more than that. The only good thing I found in this was the Powerwinch customer service - they paid shipping both ways for the multiple returns. I think the bottom line to this is that this product is made in China.

Click Here to see more reviews about: Powerwinch P77702 215 12 Volt Trailer Winch

Powerwinch 215 12 Volt Trailer WinchPowerwinch features a 20 feet polyester strap and power-in/freewheel-out operation. This product is a reliable spur-gear system that provides more powerful pull with less amperage draw.

Get 2% OFF

Click here for more information about Powerwinch P77702 215 12 Volt Trailer Winch

Read More...

Fahrenheat Ceiling-Mount 5000 Watt Electric Heater, Model# FUH5-4 Review

Average Reviews:

(More customer reviews)Electric Garage Heater
Step 1: I wanted to work comfortably in a 22 x 22 (9 foot ceiling) garage in the winter. Figuring I'd need lots of heat, I bought a portable 40,000 btu propane heater. It exhausts lots of carbon monoxide, so you have to partially open a door or window to the outside to let [cold] fresh air in -- which seriously lowers heater efficiency. The heater warmed the garage, but the approach wasn't satisfactory -- i.e., the fumes were so bad, I stopped using it. It was also very loud, like the hissing of escaping air from a large air boat; plus, when the propane tank ran out, the heater stopped; each time you needed heat, you had to drag it out, connect it to the tank, leave plenty of floor space around this self-contained-blowtorch; put it all away when you were done; and of course find a place to store it. Also, there was no thermostat. All in all, a royal pain in the keister.
Step 2: I bought one of these electric heaters. It has only half the btu's of the propane unit, but there is no need to open a window or door for ventilation. It also has a thermostat, so you can set it (to a number, not a temperature), and come back 30 minutes later and be in relative comfort. On days in the low 30s, it will keep the garage in the 60s, which is fine for working.. (My attached garage ceiling and 2 walls are insulated.) My heater is mounted high up on a wall, but it can also be mounted to hang from the ceiling, as long as the clearances laid out in the instructions, are followed. In any case, once mounted, it is out of the way, and always ready. There's nothing to haul out or set up when you need heat -- just turn it on. When done, just turn it off. This heater needs a dedicated 30-amp 220-volt circuit. You wouldn't want to use this every day, due to electricity costs, but for occasional use, it is perfect.
My advice is to skip step 1.
Note: This heater is also sold under the Dayton name, as the G73 Electric Garage Heater.

Click Here to see more reviews about: Fahrenheat Ceiling-Mount 5000 Watt Electric Heater, Model# FUH5-4

Heats things up fast AND saves floor space! No blast of cold air at start-up - automatically delays fan action until the long-life heating element is warm. Fan continues until the heating element cools off. Built-in thermostat. Powerful heater delivers up to 17,065 BTU/hr. Horizontal heat flow and adjustable downflow positions allow it to distribute heat evenly throughout the room. Plated fin heating element provides uniform heated air discharge. 14in.L x 12 1/2in.W x 12 3/8in.H. 240 Volts, 5000 Watts at 17,065 BTU/hr. 21 Amps. Ceiling mount bracket included. U.S.A. Primary Heating Application: Construction, garage, BTU Output: 17,065, Volts: 240, Amps: 21, Watts: 5,000, Blower Included: Yes, Blower (CFM): 270, Heat Settings: 10, Thermostat Included: Yes, Power Cord (ft.): Must be hardwired, Remote Included: No, Thermal Cutoff Safety Device: Yes, Dimensions W x D x H (in.): 14 1/2 x 11 1/4 x 12 1/2

Click here for more information about Fahrenheat Ceiling-Mount 5000 Watt Electric Heater, Model# FUH5-4

Read More...

Bench Dog 40-001 ProTop Contractor Benchtop Router Table Review

Average Reviews:

(More customer reviews)Absolutely no complaints about this table. It arrived in A1 condition, carefully packed. Assembly was simple thanks to both the clear instructions and the quality of the components. I doubt that constructing the table took much more than 15-20 minutes after reading the instructions.
The fence is a solid aluminium extrusion. Being a one-piece fence simplifies setting-up when working compared to some 2-piece fences. The sub fences adjust easily making zero clearance work straightforward.
The Lexan table insert supplied with the table has to be drilled and countersunk to accept whatever router you are using, which means a bit of care is required when aligning the centre of the router baseplate with the centre of the hole in the insert. Once this is done and the plate marked, the Lexan drills easily. The Lexan plate is fairly solid and shows no flexing when the router is attached (I use an ELU OF97E - now appearing as a European version of the Dewalt 621) and it works well. This router has the on/off trigger on one of the plunge handles on the opposite side of the router from the fine depth adjuster, which means it can be a bit hard to get hold of once the router is inverted in the cabinet. This can be addressed easily by putting a switch on the outside of the cabinet, if it proves a problem.
At 35lbs this table is portable enough to move around the shop as and when you need it. If I want to use the table I stand it on a Workmate and secure it with four spring clamps. This has provided plenty of stability and a comfortable working height whilst requiring minimal set-up time.
I looked at a lot of tables before reading about this one in a magazine review. I have seen nothing that comes close in terms of solid build and quality/robustness of fence for the price.

Click Here to see more reviews about: Bench Dog 40-001 ProTop Contractor Benchtop Router Table

Don't let its compact size fool you. The award-winning Bench Dog 40-001 ProTop Contractor Benchtop Router Table makes use of a unique forward offset router location and the dual-position ProFence to provide as much usable work surface as most full-size router tables. Designed to be durable, easy to move around the job site, and ready to accept any router, it provides the versatility, stability, and guidance you need to complete precision projects safely.
Versatile Design for Precision WorkWhether you're a professional craftsperson or a serious do-it-yourselfer, a router table like the ProTop Contractor lets you tackle jobs that would be difficult or impossible to complete precisely with a handheld router.
A top-quality fence is critical to the performance of any router table system, and this system relies on the feature-loaded ProFence. Its heavy-duty, one-piece aluminum frame is fully machined on the front and bottom surfaces to ensure it's flat, true, and square. Easy-adjust sub-fences and bit guard are also included.
The ProTop Contractor provides a flexible setup that can be adjusted to project-specific needs, with an aluminum miter accessory track that is adjustable to fit all standard miter gauges, plus accessory T-slots on both the table and fence that are perfect for mounting featherboards, stops, fence risers, and switches. This allows you to accommodate the full range of router applications, from cutting dadoes and slots to crafting precise joints. For work with large panels, this table also offers dual fence slots, so you can flip the fence around quickly and easily.
An integrated 2-1/2-inch dust port fits standard shop vac hoses to help keep your work area clear of debris for safety, visibility, and operator comfort.
Dependable Construction for Tough JobsThe non-marring laminate top is built using stress-skin construction for strength and flatness, and it measures 24 x 16 inches to provide a large work area. Exclusive twin steel rails support your router, while the enclosed birch plywood cabinet reduces dust and noise, and its solid panel construction makes it stronger than cheap plastic or stamped steel stands. The cabinet's rubber feet prevent table slippage and double as isolation mounts for dramatically reduced vibration.
This table's setup will accept any router, and the included router plate is predrilled to make installation extra-easy for most popular routers from leading brands like Craftsman, DeWalt, Fein, Hitachi, Makita, Ryobi, and Skil. The 15-inch inside-cabinet height provides plenty of space for whatever router you use, plus room for Bench Dog's ProLift and other accessories (not included).
This portable router table weighs just 40 pounds, and it requires assembly. It is backed by a limited lifetime warranty.
About Bench DogBench Dog offers a growing line of router tables, safety accessories, and tools for everyone from building and woodworking professionals to schools and serious beginners.
The company began in 1995 with Norston Fontaine, Karen Slatter, and the simple idea that great tools are the result of great design and solid engineering. Since then, Bench Dog tools have received an enthusiastic response from customers, trade publications, and the woodworking community at large.
What's in the BoxTable top, fence, dust port, bit guard, miter track, pre-drilled router insert plate, mounting screws, and cabinet.

Get 17% OFF

Click here for more information about Bench Dog 40-001 ProTop Contractor Benchtop Router Table

Read More...

Arnold OEM-190-180 FastAttach Twin Bag Grass Collector Review

Average Reviews:

(More customer reviews)This twin rear bagger does an excellent job BUT, I found that the bags can create a bit of a mess when trying to empty them (dust and some grass). I put 30 gallon yard bags into the grass catchers for easier clean-up and emptying of the grass clippings. Other than that this it's an excellent attachment.

Click Here to see more reviews about: Arnold OEM-190-180 FastAttach Twin Bag Grass Collector

The MTD Arnold FastAttach twin bag grass collector fits all MTD/Yardman 38-inch and 42-inch lawn tractors except for the 2001 MTD/Yard-Man Revolution. It include twin nylon bags with a 6.5 bushel capacity, a 7-inch diameter chute, a deflector hood, and a mounting bracket. Some assembly may be required to install this bagging system on your tractor, but no tools are required.

Click here for more information about Arnold OEM-190-180 FastAttach Twin Bag Grass Collector

Read More...

Marshalltown SW218 Skywalker Stilts 2.0 Adjusts 18-Inches to 30-Inches Review

Average Reviews:

(More customer reviews)I love these stilts. They are my first stilts I've ever used so I cannot compare them to standard ones, however I am glad I bought them. They work great when I do suspended ceilings, drywall taping, and whatever else...caulking/painting crown molding etc...
The adjustable front shock is nice because it stays stable and flat until you put enough weight forward to compress it. The straps are handy and work well. The leg padding is quite comfortable. I haven't used them adjusted higher than their lowest position, but the adjustment for height is awesome. Just a flip of the solid lever and slide them to any number of positive stops. Very handy. Would definately purchase again.

Click Here to see more reviews about: Marshalltown SW218 Skywalker Stilts 2.0 Adjusts 18-Inches to 30-Inches

Walk tall with confidence in the Marshalltown SW218 SkyWalker Drywall Stilts. The advanced adjustable ankle movement lets you walk more naturally and comfortably, making it an outstanding choice for beginners and seasoned professionals. The addition of the cushioned calf pad allows you to work for longer periods of time without tiring. While these SW218 SkyWalker Stilts are designed specifically for work with drywall, you cant put a limit on the variety of uses that these stilts have. They are among the best for drywall work, but they are also great for electrical work, painting, siding, or any other general repair that is just out of reach. Many people find them to be easier to maneuver than ladders for jobs at varying heights.

Get 44% OFF

Click here for more information about Marshalltown SW218 Skywalker Stilts 2.0 Adjusts 18-Inches to 30-Inches

Read More...